CAN232
CAN to RS232 Converter
Support data conversion between 1 CAN port and 1 RS-232 serial port
Support multiple conversion modes like transparent conversion, marked transparent conversion, Modbus RTU protocol conversion and data conversion
CAN port support 2.5kbps-1000kbps baud rate
Support 9~48VDC wide voltage input
Support -40～75℃ wide operating temperature range
CAN to serial converteris an interface converter that implements data exchange between CAN-bus network and RS-232 device. It also supports data exchange between CAN-bus network and Modbus RTU protocol. This product supports 1 CAN port and 1 RS-232 serial port, and adopts wall mounting which can meet the requirements of different scenes.
rs232 to can bus convertersupports multiple conversion modes like transparent conversion, marked transparent conversion, Modbus RTU protocol conversion and data conversion. Otherwise, it provides matching CAN configuration tools which can achieve data conversion between CAN bus and RS-232 serial port via easy setting.
DIP switch could implement configuration mode enablement for device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which could adapt to industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.
CAN Interface
Standard: CAN2.0A, CAN2.0B
Interface quantity: 1 CAN port
CAN signal: CANH, CANL, GND
Duplex mode: 2-wire Half Duplex Mode
Baud rate: 2.5kbps-1000kbps
Load capacity: support concurrent transmitting of 110 nodes
Transmission distance: 40m~10km
Interface form: adopt 5-pin 5.08mm pitch terminal blocks
Terminating resistor: optional external 120Ω terminating resistor
Interface protection: 2kVAC isolation protection
Serial Port
Standard: EIA RS-232C
Protocol: Modbus RTU(optional)
Serial port quantity: 1 RS-232 serial port
RS-232 signal: TXD, RXD, GND
Baud rate: 300-115200bps
Data bit: 8bit
Check bit: None, Even, Odd, Space, Mark
Stop bit: 1bit, 2bit
Interface form: DB9, Female
Transmission distance: 15m
Configuration Method
Windows configuration tool
Data Conversion Mode
Transparent conversion, marked transparent conversion, Modbus RTU protocol conversion, data conversion
LED Indicator
Power supply indicator, CAN port indicator, serial port indicator
Power Requirement
9~48VDC
2-pin 5.08mmpitch terminal blocks
Support non-polar connection
Power Consumption
Full-load: 0.84W@24VDC
Environmental Limit
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%～95%(no condensation)
Physical Characteristic
Housing: IP40 protection, metal
Installation: wall mounting
Dimension (W x H x D): 69mm×22mm×100mm
Weight: 238g
Industrial Standard
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge: ±8kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS
Warranty
3 years
Available Models
CAN
RS-232
Power Supply Range
CAN232
1
1
9~48VDC
3onedataprovides 10g ethernet switch, 4G router, can bus to serial converter, rs232 to can converter, serial to can bus converter, can to rs232 converter module, can bus to rs232 converter schematic, 3onedata converter, 10g ethernet switch and etc. For more info, contact us.
Send product request
Other supplier products
 |
SW4485I | 4-port RS485 HUBwith Isolation Support 1 RS-232/485 upper computer port, and 4 RS-485 lower computer port Each lower computer port can connect to... |
 |
EC Gateway | EC Gateway 3onedata provides low-power and compact ec gateway based on ARM architecture to collect data from Ethernet, serial, CAN, I/O and other d... |
 |
Industrial-grade 4G Router | IRT5300-AW-5T2D industrial strength wifi router Support 5 100M copper ports (one of them supports PoE power receiving), 2 RS-232/485 serial ports, ... |
 |
Media Converter | 3onedata's media converters provide reliable and stable conversion of Ethernet data to fiber optic signals. With industrial-grade design and strong... |
 |
IES215 Series | 5-port 100M Unmanaged Industrial Ethernet Switch Support 5 100M fiber/copper ports Support flow control, which can avoid packet loss caused by ne... |
Same products
 |
GP-AC1200 Wireless Dual Band WiFi5 Router | Seller: GPSENKE Network ICT | The AC1200 Wireless Router supports data rates up to 1200 Mbps in 2.4 GHz band & 5 GHz band, ... |
 |
GP-R650 Outdoor 5g Wireless Router WiFi router 3G\\4G\\5G | Seller: GPSENKE Network ICT | GP-R650 series industrial grade 5g router is a new generation of wireless router independently de... |
 |
Industrial Equipment - Wi-Fi Router Board | Seller: Aus.Linx Technology Co., Ltd. | Application: Canada Farm Monitoring System The concept of IIoT (Industrial Internet of Things)... |
 |
LTE Router | Seller: Aus.Linx Technology Co., Ltd. | Being an experienced Wi-Fi and 4G router manufacturer, we have been producing a wide range of h... |
 |
Wireless Network Product - 2400AC Wi-Fi Router | Seller: Aus.Linx Technology Co., Ltd. | Being an experienced Wi-Fi and 4G router manufacturer, we have been producing a wide range of h... |
