Concrete foam insulation board manufacturers selling ~ lightweight foaming cement high-strength |
Foamed cement, the foaming agent with a mechanical way fully foam by foaming foaming machine, and the foam and cement paste evenly mixed, then after foaming machine pumping system for cast-in-situ construction or moulding process, a new light contains a lot of sealed air holes of the insulating material formed by nature conservation. It belongs to the bubble thermal insulation material, the prominent characteristics of a bubble hole closed in the concrete, the concrete light and heat insulation.1) insulation: coefficient of thermal conductivity of 0.06-0.28W/ (M.K), thermal resistance is about 10-20 times that of ordinary concrete.2) light: dry bulk density is 300-1600KG/M3, equivalent to an ordinary cement concrete of 1/5 ~ 1/8, can reduce the overall load of buildings.3) integrity: but the spot construction, combined with the main project, do not need to leave every seam and the air pipe.Foamed cement4) low elastic damping: porous foam cement which has low elastic modulus, so it has good absorption and dispersion of impact load.5) insulation resistance: foam cement contains a large number of independent bubbles, and uniform distribution, sound-absorbing capacity of 0.09-0.19%, is 5 times that of ordinary concrete, are effective sound insulation function.6) resistance: the compressive strength of 0.6-25.0MPA.7) water resistance: Cast-in-place foamed cement smaller water imbibition, relatively independent closed bubbles and good integrity, make its have certain waterproof performance.8) the same durability: with the main project life.9) the construction is simple: just use the cement foaming machine can realize automatic operation, can realize remote vertical height of 200 meters of the conveyor, the workload of 150 - 300M3/ working days.10) production and processing: foamed cement can not only in the production of the factory into a variety of products, but also to the construction site, the casting directly into roofing, ground and wall, and sawing, planing, nail, drilling and other processing.11) environmental protection: foam cement raw materials required for the cement and foaming agent, foaming agent for neutral, does not contain harmful substances such as benzene, formaldehyde, avoiding environmental pollution and fire hazard.12) economic: comprehensive cost is low
Other supplier products
All supplier products
Same products
![[manufacturers] special pin A-class non-combustible phenolic plate | and construction with life](/images/products/products_119150_71227da724e2e336850f6a4ab1683f41.jpeg)
