Anti-finger PPGI
Painting structureTop surfaceBottom surfaceMarkPrimer coating + Finish coatingNo coating2/0Primer coating + Finish coatingPrimer coating or single back coating2/1Primer coating + Finish coatingPrimer coating + Finish coating2/2Primer coating + Finish coatingPrimer coating + Finish coating3/3Type of CoatingCharacteriaticPolyesterGood adhesion,Website:, rich colors, a wide range of outdoor durability and moldability, medium chemical resistance, and low cost.Silicone-modified PolyesterGood film hardness, excellent wear resistance and heat resistance, good outdoor durability and chalk resistance, general gloss retention and flexibilityHigh Durability PolyesterExcellent color retention,outdoor durability, chalking resistance and UV resistance, good film adhesion, colorful, cost-effectivePolyvinylidene FluorideExcellent color retention, outdoor durability and chalk resistance and UV resistance, excellent solvent resistance, good formability and anti-dirty resistance.Important informationstandardJIS EN GBTfinishingcolornamePPGI,ppglweight4.5mt/coilthickness0.12-2.5mmGradeCGCCwidth700-1250mmmaterialGalvanized steel coilSize of zinc flower100g/㎡Production processPayoffreel.shear,welder,entrylooper,pertreatment ,dryer,coater,cooler,exit looper,recoller
Other supplier products
|
|
ASTM Galvanized Steel |
TypeGradeChemical composition,Website:≤Yield strengthTensile strengthTensile rateCSiMnPSTiReL/MpaRm/MpaA80mm/%Cold formingDX51D+Z0.120.500.600.1000... |
|
|
EPS Sandwich Panel |
Corrugated steel sheetStandardJIS G3312 (equivalent to TCD51D,Website:, CGCC, ASTM A755)Surface TreatmentChromated, unoiledThickness0.16MM to 0.8MM... |
|
|
Hot Dipped Galvanized Steel Coil |
Product detailsProduct name: Galvanized steel sheet and coilThickness:1mmWidth:1250mmMaterial: DX51D+Z,Website:, S280GD+Z, S350GD+Z, CSB, S350GD, ... |
|
|
Metal Roofing Sheets |
NO.NameCorrugated steel plate1Capacity2Surface protectionFilm3HS code721049004Raw materialSGCC,Website:, SPCC, DC51D, SGHC, A6535Anti-MEK wiping100... |
|
|
DC51D Color Steel |
ItemTest MethodTest Resultcross cut test100/100 taping testgoodPencil hardness test45°;，one hour and overgoodBending test180°;*3TgoodImpact test500... |
All supplier products
Same products
