T4 Steel Grating Stair Treads

Type of Stair Treads

Checkered plate nosing

Structure Characteristics

T4

YES

For anchoring with bolts, the two ends are closed with 65 x 5 mm flat bars with holes with checkered plate nosing

T1,T2,T3,T4Bearingbarat30mmpitch

95

125

155

185

215

245

275

T1,T2Bearing bars 40mm pitch

125

165

205

245

285

T3, T4 Bearingbars40mmpitch

115

155

195

235

275

Fixingholecenters

45

75

100

150

Grade

CN: Q235, Q345, USA: A36, UK: 43A

Standard

CN: YB/T4001-1998, USA: ANSI/NAAMM, UK: BS4592-1987, AUS1657-1988, JJS

Certification

CE, GOST, ISO9001, ISO14001, HSE

Bearing bar type

Plain, Serrated (tooth-like), I bar (I section), Serrated-I

Bearing bar size

20X5, 25X3, 25X4, 25X5, 30X3, 30X4, 30X5, 32X3, 32X5, 40X5, 50X4.75X8,100X8mm,etc

Bearing bar pitch

20,25,30,32.5,34.3,40,50,60,62,65mm

Cross bar size

5X5, 6X6, 8X8mm (twisted bar)/5, 6, 8mm ( round bar)

Cross bar pitch

0, 50, 60, 65, 76, 100, 101.6, 120, 130mm, etc.

Panel size

3x20ft,3x24ft,3x30ft,5800x1000,6096x1000,6400x1000, as request

Surface treatment

Untreated, hot dip galvanized, cold dip galvanized, painted, powder coated,pickling, electrolytic polishing, or as customers' requirement.

Galvanization Standard

CN: GB/T13912, USA: ASTM (A123), UK: BS729

Color

Silver/Black

Application

petroleum and chemical, port, power, transportation, papermaking, medicie, steel and iron, food, municipality, real estate, manufacturing

Three ways of surface treatment can be adopted: galvanizing, painting and untreated, of which hot- dip galvanizing is recommended.

Hot-dip galvanizing

It is a form of galvanization. It is a process of coating steel grating with a thin zinc layer. By passing the metal through a molten bath of zinc, the average coating thickness is 70μm whensteel bardsrange from 3mm to 5mm in thickness.

Painting

It is also a good way to get surface protective film. Coating thickness depends on the customer's choice.