SMC Cable Braket
The SMC cable bracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC CableBraket Specification
Project |
SMC Cable Braket |
Galvanized angle bracket |
Density (g/cm3) |
||
Specific strength |
167 |
90 |
Corrosion resistance (80°/100h) |
||
Insulation strength (kv/mm) |
Conductive |
|
Flame retardancy |
meets the FH-1 |
-- |
Water resistance (%) |
-- |
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
insulation |
insulation |
Conduction |
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
Weight |
light |
weight |
Eddy current effect (loss) |
no |
Large loss |
Manufacturing process is difficult |
easy |
Many processes and long cycle |
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
Use life |
30 years |
10 years |
The high-composite precision molds produced by Waiwai Tree have the characteristics of low energy consumption; our SMC and BMCmoldinghave no waste, and there is no need to clear the inner cavity. Having only a small temperature difference, our SMCBMC composites have stable mold temperature, good appearance, and high efficiency. Thus, they are now widely used in new energy vehicles, high-speed rail, and electric motors.
Send product request
Other supplier products
BMC, SMC, GRP, GFK Roof Tiles | Aobang composite roofing tiles is divided into: BMC roofing tiles, SMC roofingtiles, GRP roofing tiles, GFK roofing tiles. Due to the excellent pr... | |
BMC/SMC Motor | BMC/SMC Electric MotorsDescription Motor BMCreplaces traditional iron and aluminum, reduces the process, seals more, and has higher safety facto... | |
Auto Parts Mould | Auto Parts MouldFeatures Injection molding and pressure molding are the main methods. When designing the flow channel and parting surface, the cav... | |
BMC, SMC, GRP, GFK Wall Panel | BMCcompositewall panel is a new generation of high performance building partition board made of a variety of building materials instead of traditio... | |
SMC Antenna Reflector Mould | The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest lev... |
Same products
Keep Cold Pipe Bracket | Seller: Cangzhou Zhiang Pipeline Equipment Manufacturing Co., Ltd | Keep cold pipe bracketis an assemblyused to protect and maintain coldeffect of piping system. Kee... | |
Heat Insulation Pipe Bracket | Seller: Cangzhou Zhiang Pipeline Equipment Manufacturing Co., Ltd | Heat Insulation Pipe Bracketis a device used to protect and insulate pipes. It is usually made of... | |
Pipe Support Bracket | Seller: Cangzhou Zhiang Pipeline Equipment Manufacturing Co., Ltd | The braceis between the beam and the pad. Role: transfer load,allow a certain displacement. Pipe... | |
Pipe Clamp | Seller: Cangzhou Zhiang Pipeline Equipment Manufacturing Co., Ltd | Pipe clampsare common industrial assembliesused to protectpipes and other components. The role: t... | |
4 1/2 Inch Oil and Gas Well Drill Pipe | Seller: Jinzhou City TongShun Drilling Machine Co.,Ltd | The 4 1/2 Inch Oil and Gas Well Drill Pipeis a high-performance drilling tool specifically design... |