High Quality Malleable Iron Pipe Clamp Fittings
High Quality Malleable Iron Pipe Clamp Fittings
Malleable Iron Pipe Clamps are used for a versatile, muti-purpose system. The flexibility of the system allows complex structures to be assembled in a quick and efficient manner. Whilst used primarily to construct safety handrail and balustrades, and also has many other uses such as providing support structure for canopies, carports and can provide framework for chainlink, mesh or ball stop fencing. All fittings are hot dip galvanised to BS EN ISO1461 and tubing is galvanised to BS1387 providing long lasting resistance to corrosion. Powder Coat finishes to standard RAL colours are available on request. We would point out that the chosen size/combination for any application remains completely the responsibility of the customer and any dead and imposed loads applied must be taken into consideration when designing an installation. SIZES: Six different size ranges are available as show in the table, hence a suitable size can be selected for any particular application. Malleable Iron Pipe Clamps are easlily identified by a type number of each disign eg. 125 followed by a size code eg. D48, the latter part of which corresponds with the approximate outside diameter of the tube to be used (48.3mm=1-1/2" nominal bore in this case). Hence a 90° elbow suitable for an 1-1/2" norminal bore tube in this example would be denoted as a 125-D48.
Send product request
Other supplier products
High Quality Galvanized Malleable Iron Pipe Fittings in BS, DIN, NPT standard | High Quality Galvanized Malleable Iron Pipe Fittings in BS, DIN, NPT standard 1. The pipe fitting surface treatment: a. Black (as cast) b. Galvaniz... | |
0.38mm thickness friction tape of rubber adhesive | 0.38mm thickness friction tape of rubber adhesive | |
Black Fabric Insulation Cloth Tape for Russia Market | Black Fabric Insulation Cloth Tape for Russia Market Usage Insulative bandaging and fixation on joins of wire and cable under the voltage of 380V a... | |
galvanized Plain 3/8" Malleable Iron top Beam Clamp | galvanized Plain 3/8" Malleable Iron top Beam Clamp Malleable Iron Beam Clamp Application: Provides support for conduit hanging systems. Features... | |
Hot dip malleable iron Channel beam clamp | Hot dip malleable iron Channel beam clamp Malleable Iron Beam Clamp Application: Provides support for conduit hanging systems. Features: • ... |
Same products
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... | |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... | |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... | |
NC50 PIN 4145H XT39 BOX Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... | |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | API 5CT 2-7/8"NUE N80 Tubing Coupling Introduction NUE Thread Couplings are short lengths of pi... |