ASTM A500 Steel Pipe
ASTM A500 Steel Pipe
ASTM A500 is the standard specification for circular, square, and rectangular tubes of cold-formed welded and seamless carbon steel structures. ASTM A500 is the most common specification for Hollow Structural Sections in North America. The correct way to specify the circular HSS section is to represent the outer diameter in decimal inches to three decimal places (i.e., 5.563 x 0.250) according to the nominal wall thickness.
Why A500 Steel Pipe?
Since ASTM A500 is a structural specification, circular high-speed steel produced according to this specification is suitable for structural applications and general construction purposes.
The specified yield strength of A500 Grade C (the most commonly available grade) is 46 ksi. The specified yield strength of A53 Grade B is 35 ksi. Yield strength increased by more than 30%. Therefore, the strength-to-weight ratio of A500 circular HSS is greater than that of the A53 pipe. So, if you do the job with round HSS, you need less steel, by weight, to do the job—the lighter it is, the lower the cost.
The tolerances of A500 are tighter than those of A53, so the HSS of the A500 circle has higher quality and less variability. If you want to know the difference betweena500 grade c pipeand the A795 pipe, continue browsing.
Round HSS has a superior surface finish and is not as lacquered as normal A53 tubes. Since this lacquer coating needs to be removed from the A53 pipe to accommodate welding and painting, so this can save money and time.
ASTM a500 grade c pipeApplications
All steel structures have their pros and cons including structural supports, building columns, highway signs, oil field services, and communication towers, to name a few. But ultimately ASTM A500 is a better choice when you need a round profile.
We encourage architects, fabricators, structural engineers, and contractors to read up on ASTM A500 and visit The Steel Tube Institute's website because it offers a wide variety of technical publications, load tables, and design aids.
Hebei Tianchuang Pipe Co., Ltd is a reliable china steel pipe suppliers, we provide china steel pipe, electric welded pipe, w beam guide rail, steel pipe productsand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
Q235 Steel Pipe | Wholesale S235JR Pipe Q235 tubes are used to deliver low-pressure fluids. Such steel is generally smelted by the converter or open-hearth furnace. ... |
 |
BS1387 Steel Pipe | Know More about BS1387 Pipe BS 1387: 1985 has been withdrawn and replaced by the European standard EN 10255:2004 (implemented by UK national stand... |
 |
Scaffolding Pipe | Overview of Steel Scaffolding Scaffolding is a temporary structure used to support the original structure, and it is also used as a platform for th... |
 |
Highway Guardrail | The wave guardrail is composed of two corrugated steel highway guardrail plates and two vertical columns sandwiched between the two. The two-column... |
 |
Steel-plastic Composite Pipe | Brief Introduction of Steel-plastic Composite Pipe of composite pipe: transportation of drinking water, hot and cold water, fire water, drainage... |
Same products
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | API 5CT 2-7/8"NUE N80 Tubing Coupling Introduction NUE Thread Couplings are short lengths of pi... |
