.

HDPE Siphon Pipe

HDPE Siphon Pipe

Siphon rainwater drainage system is a new technology which is developed very fast in Europe, American, Japan, South-American, Asia and Africa countries. It is a more scientific and advanced technology, can be used on big construction building like factory, workshop, warehouse and public building. The inner drainage system has obviously advantages comparing with the traditional gravity current drainage system.

HDPE Siphon Pipe, HDPE Drainage Pipe, HDPE Corrugated Pipe,HDPE Trenchless Pipe, HDPE Water Supply Pipe, HDPE GSHP pipe,HDPE Pipe FittingsFactory.

Specification

Straight Series

Nominal Diameter

S16

S25

DN

(mm)

Tolerance (mm)

Wall Thickness (mm)

PN

(Mpa)

Wall Thickness

(mm)

PN

(Mpa)

32

+0.3

40

+0.4

50

+0.5

63

+0.6

75

+0.7

90

+0.8

110

+0.8

125

+0.9

160

+1.0

200

+1.1

250

+1.3

315

+1.5

Coil Series

Nominal Diameter

S16

Length: M/Roll

DN

(mm)

Tolerance

(mm)

Wall Thickness

(mm)

PN

(Mpa)

32

+1.4

50, 100, 200, 300, 500

40

+1.5

50

+1.6

50, 100, 200

63

+1.7

50, 100

Properties

Project

Requirement

Longitudinal reversion(110℃)

≤3% No delamination, cracking and blistering

MFR

(5kg, 190℃)/(g/10min)

The MFR difference between the raw material particles should not exceed 0.2

Oxidation induction time

(200℃/min)

≥20

Hydrostatic strength test

(80℃, 165h, 4.6Mpa)

No broken, no leakage

Ring stiffness (KN/m3)

Only for the pipes with a “BD” represents

SR≥4

Combustion toxicity index

≤1

System Composition

The siphon drainage system is mainly composed of rainwater head, fastening systems,HDPE pipe and the corresponding design

Tengyuan can supplymunicipal engineering pipe, dredging engineering pipe,HDPE Gas Pipe, Power Engineering Pipe,Mining Pipeand agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.

System Advantages

Compared with the traditional gravity drainage system, the siphon drainage system has advantages as follows:

Features:

level is0 (the lowest)and no mildew material. Compared with some other commonly used plastic material, PE is much mildew resistance and it could be used for a long time without fouling.



Send product request

To: Shandong Tengyuan Building Materials Technology Co.,Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

HDPE Gas Pipe
HDPE Gas Pipe HDPE Gas Pipe Detailed Information: Specifications DN(mm) PE80 PE100 SDR11 SDR11 Nominal Pressure ...
HDPE Siphon Pipe
HDPE Siphon Pipe HDPE Siphon Pipe Siphon rainwater drainage system is a new technology which is developed very fast in Europe, American, Japan, South-American, Asi...
HDPE Corrugated Pipe
HDPE Corrugated Pipe HDPE Corrugated Pipe Specification Diameter(mm) 100, 150, 200, 225, 300, 400, 500, 600, 700, 800 Materials Polyethyl...
HDPE Irrigation Pipe Fittings
HDPE Irrigation Pipe Fittings HDPE Irrigation Pipe Fittings PE agricultural irrigation pipe fittings are practical patent products, which are of high quality and low cost and h...
HDPE Cables Protective Pipe
HDPE Cables Protective Pipe HDPE Cables Protective Pipe We provide you with high-end quality of power engineering pipe system, covering the HDPE electrical conduit, MPP elect...
All supplier products

Same products

Simplex Armored Optical Fiber Cable
Simplex Armored Optical Fiber Cable Seller: Zhejiang Flexible Technology Co., Ltd Simplex Armored Optical Fiber Cable 1、Protected by mini diameter stainless steel tube 2、Avoid imp...
Flexible Metal Conduit Water Proof - PEG23LSZH Series
Flexible Metal Conduit Water Proof - PEG23LSZH Series Seller: Zhejiang Flexible Technology Co., Ltd Flexible Metal Conduit Water Proof- PEG23LSZH Series Waterproof Flexible Metal Conduit, PEG23LSZ...
Household Mould 1104
Household Mould 1104 Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Household Mould Description Mainly for pressure molding, the cavity pressure should be considere...
BMC/SMC Mould
BMC/SMC Mould Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD BMC/SMC plasticMoulding Description: We mainly use injection molding and pressure molding as the...
Shell Moulding
Shell Moulding Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Shell Moulding Description Mainly for injection molding, the cavity pressure should be considere...