Malleable Iron Long Tee
Malleable Iron Long Tee
Malleable Iron Pipe Clamps
|
Malleable Iron Pipe Clamps Type 104LongTee 90° joint, often used to join intermediate uprights to top rails on level sites. This pipe clamp can be used where through tube (horizontal) has to be joined within the fitting. Where such a joint is not required, type 101 can often be used as an alternative. |
||
|
Body Material Standard |
Malleable Iron, meet standard ASTM A197 |
|
|
Screw |
Stainless and Carbon Steel |
|
|
Tensile Strength |
>=350Mpa |
|
|
Elongation |
>=10% |
|
|
Hardness |
HB<=150 |
|
|
Size Available |
AA to E (OD size 27-60 MM) |
|
|
Surface Treatment |
Hot Dipped Galvanized, Black, Zinc Plated & Powder Coated |
|
|
Pipe Clamp Size |
Nominal Bore |
Outside Diameter |
|
AA21 |
1/2’’ |
|
|
A27 |
3/4’’ |
|
|
B34 |
1’’ |
|
|
C42 |
1-1/4’’ |
|
|
D48 |
1-1/2’’ |
|
|
E60 |
2’’ |
|
Malleable Iron Pipe Clampsare easlily identified by a type number of each design eg. 125 followed by a size code eg. D48, the latter part of which corresponds with the approximate outside diameter of the tube to be used (48.3mm=1-1/2" nominal bore in this case)Hence a 90° elbow suitable for an 1-1/2" norminal bore tube in this example would be denoted as a 125-D48.
Malleable Iron Pipe Clamps are used fora versatile, multi-purpose system. The flexibility of the system allows complex structures to be assembled in a quick and efficient manner.
Send product request
Other supplier products
|
|
Cross Over Malleable Iron Pipe Fittings | Cross Over Malleable Iron Pipe Fittings Malleable Iron Pipe Fittings Supplier Malleable Iron Pipe FittingsFIG NO. 85 Crossover M... |
 |
Carbon Steel Pipe Nipples | Steel Pipe Nipples Carbon Steel Pipe Nipples,Carbon Steel Pipe Fittings Supplier Product: steel pipe nipplesFeatures: 1) Material: ERW steel pip... |
 |
ERW steel pipes Hose Nipples | Hose Nipples Carbon Steel Pipe Nipples Product:hose nipples or hose menderFeatures: 1)Material:ERW steel pipes Hose Nipplesor seamless steel pip... |
 |
90°Bends Malleable Iron Pipe Fittings | Malleable Iron Pipe Fittings1 Bends M&F 90° Malleable Iron Pipe Fittings Supplier:Shijiazhuang Sunny Trading Co., Ltd. 90°Ben... |
 |
seamless steel pipes | Hose Nipples Carbon Steel Pipe Nipples Product:hose nipples or hose menderFeatures: 1)Material:ERW steel pipes Hose Nipplesor seamless steel pip... |
Same products
 |
UHMWPE pipe for mining in Australia | Seller: Shandong Yanggu Dragon New Material Co Ltd | UHMWPE pipe for mining in Australia Discover the Ultimate Solution: Are you ready to eleva... |
 |
20543RW Interlock One Piece Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | 20543RWInterlock One Piece Fittings Product Introduction H20543RW HT H... |
 |
20411RW One Piece Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | HT HydraulicsSince 1987 Hydraulic Hose Fitting -One Piece Fittings Metric Female 24° Cone O-... |
 |
26713RW Interlock One Piece Hose Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | HT Hydraulics Since 1987 Hydraulic Hose Fitting-Interlock One Piece Fittings JIC FEMALE 74° ... |
 |
Cup Nut Pipe Loop | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Size: 1”~8”Material: Carbon SteelDimension: UL 203, MSS SP-58/69 (Type-7)Surface: Pre... |
