ASTM A 106 Black Carbon Seamless Steel Pipe
Standard: ASTM A106/A106M
This specification covers for high-temperature service.
Application of ASTM 106 :
Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.
Manufacturing Process of ASTM A106 :
ASTM A106 seamless steel pipe are produced either by cold-drawn or hot rolled, as specified.
Hot finished pipe need not heat treated. When hot finished pipe is heat treated, it shall be heat treated at a temperature of 1200°F or higher. Cold drawn pipe shall be heat treated after final cold draw pass at a temperature of 1200°F or higher.
Details of ASTM A106 Seamless Steel Pipe We can supply:
Manufacture:Seamless process, cold drawn or hot rolled
Cold drawn: O.D.: 15.0～100mm W.T.: 2～10mm
Hot rolled: O.D.: 25~700mm W.T.: 3~50mm
Grade: Gr.A ,Gr.B, Gr.C.
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Threaded
Mechanical and NDT Tests for ASTM A106
Bending Test— a sufficient length of pipe shall stand being bent cold through 90° around a cylindrical mandrel.
Flattening test-although testing is not required, pipe shall be capable of meeting the flattening test requirements.
Hydro-static test—except as allowed, each length of pipe shall be subjected to the hydro-static test without leakage through the pipe wall.
Nondestructive electric test-as an alternative to the hydro-static test, the full
Send product request
Other supplier products
|
|
ASTM A 106 Black Carbon Seamless Steel Pipe | Standard: ASTM A106/A106M This specification covers for high-temperature service. Application of ASTM 106 : Pipe ordered under this specification ... |
 |
API 5L X65 PSL1/PSL 2 LSAW Carbon Steel Pipe | Standard: API Spec 5L API Spec 5L specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of and . This s... |
 |
Flanges and Pipe Fittings | Types: FLANGES:, Slip-on Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Blind Flange, Spectacles Blind, Orifice Flange, Reducing F... |
 |
EN10219 S275JRH Structural ERW Steel Pipe | Standard: EN10219 This specification covers (cold formed welded structural hollow sections of circular, square or rectangular forms and hollow sec... |
 |
SSAW Spiral Welded Steel Pipe | Standard: API Spec 5L API Spec 5L specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless pip... |
Same products
 |
WATER-COOLED PANELS | Seller: CHNZBTECH Co.,Ltd. | WATER-COOLED PANELS CHNZBTECH, a professional water cooled panelssupplier, is committed to getti... |
 |
WATER COOLED CABLE | Seller: CHNZBTECH Co.,Ltd. | WATER COOLED CABLE Large cross-section water cooled power cablesare used for the connection betw... |
 |
VOD VACUUM OXYGEN DECARBURIZATION | Seller: CHNZBTECH Co.,Ltd. | VOD VACUUM OXYGEN DECARBURIZATIONVD/VOD Furnace The equipment structure of a VOD furnaceis bas... |
 |
TOP CHARGING ELECTRIC ARC FURNACE | Seller: CHNZBTECH Co.,Ltd. | TOP CHARGING ELECTRIC ARC FURNACE Top EAF chargingis convention type, from 0.5t to 200t, each ca... |
 |
Submerged ARC Furnace | Seller: CHNZBTECH Co.,Ltd. | The saf submerged arc furnace(SAF) is a specialized heating system utilized to produce a range of... |
