Bright Annealed Tubes
Product description
Bright Annealed TubeDescription
Bright annealed stainless steel tubeis a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainlesssteel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the tube with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is not possible for the regular annealing.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel tubing used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealed Tube Advantages
Bright Annealed Tubes Sizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubingsizes:
|
OD(mm)*T.W (mm) |
|
6×1/6×1.5 |
|
10×1/10×1.5/10×2 |
|
12×1/12×1.5 |
|
16×1/16×1.5/16×2 |
Bright Annealed Tubes Materials
Austenitic Stainless Steel:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367
Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Bright Annealed Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516
Heat Treatment: Bright Annealed
NDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Fe |
Al |
Co |
Zr |
Nb |
Tu |
Va |
|
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
|||||||||
|
Nickel Alloy |
||||||||||||||||||
|
Inconel 600/No6600/2.4816 |
1 |
14-17 |
≧72 |
|||||||||||||||
|
Inconel 600/No6601/2.4851 |
21-25 |
58-63 |
1 |
|||||||||||||||
|
Inconel 690/No6690 |
27-31 |
58 |
||||||||||||||||
|
Inconel 625/No6625/2.4856 |
20-23 |
≧58 |
≦0.4 |
5 |
≦0.4 |
|||||||||||||
|
Inconel 718/No7718/2.4668 |
17-21 |
50-55 |
Remainder |
|||||||||||||||
|
Incoloy 800/No8800/1.4876 |
1 |
19-23 |
30-35 |
≧39.5 |
||||||||||||||
|
Incoloy 800H/No8810/1.4958 |
1 |
19-23 |
30-35 |
≧39.5 |
1 |
|||||||||||||
|
Incoloy 825/No8825/2.4858 |
1 |
38-46 |
≧22 |
|||||||||||||||
|
C-276/No10276/2.4819 |
1 |
Balance |
3-4.5 |
|||||||||||||||
|
Monel 400/No4400/2.4360 |
2 |
≧63 |
28-34 |
|||||||||||||||
|
Monel K-500/No5500 |
63 |
27-33 |
2 |
|||||||||||||||
|
Alloy 20/No8020/2.4660 |
1 |
2 |
19-21 |
32-38 |
Balance |
8C-1 |
||||||||||||
|
Alloy 28/No8028 |
1 |
26-28 |
30-34 |
Remainder |
||||||||||||||
|
Duplex Steel |
||||||||||||||||||
|
S31803/1.4462 |
1 |
2 |
21-23 |
|||||||||||||||
|
S32205/1.4462 |
1 |
2 |
22-23 |
|||||||||||||||
|
S32750/1.4410 |
24-26 |
|||||||||||||||||
|
S32760/1.4501 |
1 |
1 |
24-26 |
|||||||||||||||
|
Austenitic |
||||||||||||||||||
|
304/1.4301 |
1 |
2 |
18-20 |
8-10.5 |
||||||||||||||
|
304L/1.4307 |
1 |
2 |
18-20 |
|||||||||||||||
|
304H/1.4948 |
1 |
2 |
18-20 |
|||||||||||||||
|
316/1.4401 |
1 |
2 |
16-18 |
|||||||||||||||
|
316L/1.4404 |
1 |
2 |
16-18 |
|||||||||||||||
|
316H/1.4919 |
1 |
2 |
16-18 |
|||||||||||||||
|
316Ti/1.4571 |
1 |
2 |
16-18 |
|||||||||||||||
|
321/1.4541 |
1 |
2 |
17-19 |
|||||||||||||||
|
321H/1.4878 |
1 |
2 |
17-19 |
H |
||||||||||||||
|
317/1.4449 |
1 |
2 |
18-20 |
|||||||||||||||
|
317L/1.4438 |
1 |
2 |
18-20 |
|||||||||||||||
|
347/1.4550 |
1 |
2 |
17-19 |
|||||||||||||||
|
347H/1.4912 |
1 |
2 |
17-19 |
|||||||||||||||
|
310S/1.4845 |
1 |
2 |
24-26 |
|||||||||||||||
|
310H/1.4845 |
1 |
2 |
24-26 |
|||||||||||||||
|
N08904(904L)/1.4539 |
1 |
2 |
19-23 |
|||||||||||||||
|
S31254(254Mo)/1.4547 |
1 |
|||||||||||||||||
WENZHOU HUASHANG STEEL CO., LTD is a professional stainless steel buttweld fittings manufacturer. We provide Stainless Steel Tubing, Butt Weld Fittings, bright annealed stainless steel tubing, stainless steel bright annealed tube, annealed stainless steel tubingand so on. Want to know about bright annealing advantages? Please contact us.
Send product request
Other supplier products
 |
Equal Tee | Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a ... |
 |
Reducing Flanges | Similar Products Product description Reducing Flanges Features Forming: forged WELDING NECK RISE FACE REDUCER FLANGE（WNRF） Reducing Flanges ... |
 |
Reducing Flanges | Product description Reducing weld neck flangeFeatures Forming: forged WELDING NECK RISE FACE REDUCER FLANGE（WNRF） Reducing Flanges Materials S... |
 |
Long Neck Flanges | Product description Long Neck FlangesFeatures Forming: forged WELDING NECK RISE FACE REDUCER FLANGE（Long NECK ） Long Neck Flanges Materials ... |
 |
Spectacle Blind Flanges | Similar Products Long Neck Flanges for sale at very competitive factory price! Long Neck Flanges Blind Flanges Blind flange is also called blind bo... |
Same products
 |
Stainless Steel Nipple | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Material ：ASTMA312/A312M Dimensions ：ASTM A733 Threads ：ASME B1.20.1 Schedule ：40/8... |
 |
Steel Searcher Steel Product & Hardware | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ... |
 |
Frac PU Layflat Hose | Seller: SUZHOU SEAPEAK CO.,LTD | The outer cover of our PU layflat hose has been produced with extra thickness for tough environme... |
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... |
 |
SDS Micro Copper Coated Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... |
