Ring / Cylinder Forging Component
Ring / Cylinder ForgingsComponent
Ring forgings are ring-shaped objects in which external force is applied against the metal blank and transform it by plastic deformation. This force is typically achieved through the use of hammer or pressure. The forging process creates a fine grain structure and improves the physical properties of the metal. Ring forgings can be seen everywhere in daily life.
Cylindrical parts are an important type in the open forgingindustry and are important component of products such as pressure vessels and cracking reactors. The forged steel round bar can be produced according to the drawings and requirements provided by the customer. The surface of the forgings is clean and has small machining allowance.
Main parameters Ring / Cylinder
Ring：Outside diameter≤Φ850mm Cylinder：Outside diameter≤Φ850mm
Common technical standards Ring / Cylinder
Ring: NB/T47008~47010
Cylinder: GB/T3077 EN10083 EN10085 JB/T6395
Typical steel grades Ring / Cylinder
Ring: #20, #35, 16Mn, 15CrMo, 1.25Cr-0.5Mo, 2.25Cr-1Mo, 2.25Cr-1Mo-0.3V, 12Cr2Mo1V, 21CrMo10, 0-1Cr8Ni9(Ti), 1Cr17Ni2, 304(L), 316L(N), 321, 347, 00Cr19Ni13Mo3, 00Cr22Ni5Mo3N
Cylinder: 18CrNiMo7-6, 17CrNiMo6, 20CrNiMo, 20CrNi2Mo, 20CrMnMo, 20CrMnTi, 34CrNiMo6, 30CrNiMo8, 40CrNiMo, 35CrMo, 42CrMo
Applications Ring / Cylinder
Gears, wheels, etc. for port machinery and marine machinery. Pressure vessel forgings for chemical machinery
As a die steel supplier, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
HOT WORK DIE STEEL | Hot work die steel, also known as hot work tool steel, is a type of steel specifically designed to withstand high temperatures and severe mechanica... |
 |
DIE STEEL (MOULD STEEL) | Die steel products are used to make molds of cold punching, hot forging and die casting, etc. It is the main processing tool for producing parts in... |
 |
4Cr5MoSiV1 Steel | As H13 air-quench-hardening hot work die steel imported from the United States, 4Cr5MoSiV1 is representative steel grade with a wide range of uses ... |
 |
Disk / Flange Forging Component | Disk / Flange Forging Component The basic process used for disk forgingis upsetting, and then chamfering, rounding, and leveling as the subseque... |
 |
4Cr5MoSiV1 Steel | 4Cr5MoSiV1Steel As H13 air-quench-hardening hot work die steel imported from the United States, 4Cr5MoSiV1 is representative steel grade with a ... |
Same products
 |
Hot Rolled Galvanized Sheet | Seller: North China Steel (Shandong) Co., Ltd. | Hot Rolled Galvanized Sheet Description Specifications & Technology:CustomizeGalvanized St... |
 |
Galvanized Seamless Pipe | Seller: North China Steel (Shandong) Co., Ltd. | Galvanized Seamless Pipe Description Specifications & Technology:Customizeseamless steel p... |
 |
Galvanized Longitudinal Welded Pipe | Seller: North China Steel (Shandong) Co., Ltd. | Galvanized Longitudinal Welded Pipe Description Specification & Technology:Customizewholesal... |
 |
Electro-Galvanized Steel Pipe | Seller: North China Steel (Shandong) Co., Ltd. | Electro-Galvanized Steel Pipe Description Specifications & Technology: Customizewholesale ga... |
 |
Hot Rolled Galvanized Steel Coil | Seller: North China Steel (Shandong) Co., Ltd. | Hot Rolled Galvanized Steel Coil Description Specifications & Technology: Customize accordin... |
