Steel Billet
General Introduction of Steel Billet
Prime steel billetsare the second stage product in steel production. They belong to hot rolling and directly made and formed in the process of steel smelting, belonging to the category of casting semi-finished products. Their final products involve deformed steel rods, wires, and other steel products. As one of the professional steel billet suppliers, HUAROoffers high-quality prime billetfor sale.
Steel Billets Production Process
The steel billets production process consists of three steps.
First, prepare scrap iron or sponge iron (DRI).
Secondly, scrap iron or sponge iron (DRI) is melted in an electric arc furnace (EAF) and the necessary elements are added to enhance the properties and quality of the steel billets to meet standard quality and customer requirements. Electric arc furnace technology converts electrical energy into heat to melt steel. Compared with most other metal melting methods, the advantages of the arc are clean, energy-saving and controllable melting processes.
Finally, the steel is cast into billets.
Application of Steel Billets
The company's customers use steel billets to make round steel, shaped steel, and coils. These long products are mainly used in small and medium-sized construction projects, such as residential and commercial units, and other general construction projects, including machine tools, auto parts, and large construction projects requiring steel billets for reinforced concrete. High strength and durability, can be used in Bridges, DAMS, highways, and structures that can withstand high compression forces as well as high-rise buildings.
Specification for Steel Billets
Steel Billets conform to various types of steel billetsand accordingly include JIS DIN ASTM EN and GB standards. The normal thickness is 130 * 130mm and 150 * 150mm, and the length is usually 6m-12m. Both ends will be gas cut and at the end of each blank, the mold number will be stamped or painted.
Steel Billet Specification |
||||||
(As per below or as per customer requirement) |
||||||
Chemistry |
%C |
%Si |
%Mn |
%P |
%S |
N(ppm) |
120 max |
||||||
Note: Tramp Elements (Ni + Cr + Cu + Mo) = 0.30% max |
Send product request
Other supplier products
Graphite Electrode | Definition of Huaro Graphite Electrode Graphite electrode is high temperature resistant graphite conductive material. It is made of petroleum coke ... | |
STEEL PRODUCTS AND RAW MATERIALS FOR STEEL INDUSTRY | Steel Product Different types of raw steel productsare necessary for a host of different industries. And they are important commodities related to... | |
Cold Rolled Coil | Description ofCold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot roll... | |
Iron Ore | How to Identify Natural Iron Ore Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually ric... | |
Iron Ore Concentrate | Description of Iron Ore Concentrate Iron ore concentrate is produced from the magnetite iron ore in the beneficiation process. When the iron ore i... |
Same products
WATER-COOLED PANELS | Seller: CHNZBTECH Co.,Ltd. | WATER-COOLED PANELS CHNZBTECH, a professional water cooled panelssupplier, is committed to getti... | |
WATER COOLED CABLE | Seller: CHNZBTECH Co.,Ltd. | WATER COOLED CABLE Large cross-section water cooled power cablesare used for the connection betw... | |
VOD VACUUM OXYGEN DECARBURIZATION | Seller: CHNZBTECH Co.,Ltd. | VOD VACUUM OXYGEN DECARBURIZATIONVD/VOD Furnace The equipment structure of a VOD furnaceis bas... | |
TOP CHARGING ELECTRIC ARC FURNACE | Seller: CHNZBTECH Co.,Ltd. | TOP CHARGING ELECTRIC ARC FURNACE Top EAF chargingis convention type, from 0.5t to 200t, each ca... | |
Submerged ARC Furnace | Seller: CHNZBTECH Co.,Ltd. | The saf submerged arc furnace(SAF) is a specialized heating system utilized to produce a range of... |