SDS Steel Fiber
There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control, and other functions. Widely used in industrial factory floors, highways, high-speed rail, bridges, airports, tunnels, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc. Welcome to contact us for more information about steel fibers for concrete reinforcement.
Advantages of Loose Hooked End Steel Fiber
Technology advantage
The design of end hooks at both ends of steel fiber is the best anchoring design, which slowly deforms in the process of drawing, thus enhancing the binding force between hooked steel fiber and concrete.
Material advantage
SDS hooked steel fibre is made of high-quality wire by cold drawing, and its tensile strength is greater than 1100MPa, which ensures extremely small tolerance and high tensile strength.
Economic advantage
- Shorten the construction period, especially suitable for large projects requiring continuous and rapid pouring of concrete.
Advantage of Brass Coated Micro Steel Fiber
Performance Advantage
With good dispersion performance in concrete; less impact in UHPC Liquidity and high tensile strength.
Characteristic Advantage
Providing good impact, fatigue, shrinkage control, and ductility in all kinds of concrete.
Material Advantage
Significantly improve the toughness of concrete.
Advantages Of Glued Hooked End Steel Fiber
Performance Advantage
Improve the structural strength of concrete, impact resistance, wear-resistance and freeze-thaw resistance, as well as the durability.
Characteristic Advantage
Reduce crack widths and control the crack widths tightly.
Economic Advantage
Reduce steel reinforcement requirements.
The Formation of Steel Fiber
Steel fibers are defined in ASTM A820 as pieces of smooth or deformed fibers that are sufficiently small to be dispersed at random in a concrete mixture. ASTM A820 steel fibre reinforcement designates tensile requirements, dimensions and permissible variations. There are mainly 4 steps for steel fibers based on our production process:
Raw Material
Dry Drawing
Glued
stampling & Forming
The Benefits of Steel Fiber
For the same mixing and construction, there is no need to add equipment or increase the construction cost of metal fibers for concrete due to the low steel fibre cost.
Under the same strength requirement, metal fibers for concrete can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.
Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.
Convenient construction, saving labor, greatly shortening the construction period and saving the total steel fibre cost.
The Working Principle of Steel Fiber
The working principle of steel fibers for concrete reinforcement involves reinforcing the concrete matrix in three dimensions using steel fibers. These metal fibers, with their specific tensile strength, aspect ratio (length/diameter), and anchorage, play a crucial role in enhancing concrete performance.
By being distributed throughout the concrete, steel fibers effectively restrain the formation of micro-cracks and help redistribute the accumulated stress resulting from applied loads and shrinkage. When cracks do occur, the steel fibers intercept them promptly and inhibit their growth, significantly reducing the likelihood of further crack propagation. This proactive approach ensures that the concrete remains strong and durable, minimizing the risk of structural failure.
FAQs of Steel Fiber
What is steel fiber reinforced concrete?
Fiber reinforced concrete is comprised of hydraulic cements containing fine and course aggregatea and fiber. A super-plasticizer is ofter used to enhance the mix workability. Fiber products are available in a variety of types and sizes. The underlying principle however on all fiber reinforced concrete is to provide discoutinuous reinforcement and effective crack control.
How do fiber work?
Fibers reinforce in three fimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter)and anchorage. the distributed fibers resrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The earlier a crack is intercepted and its growth inhibited, the less chace it will have develop.
What are the types of steel fibers used in concrete?
Types of steel fibre including：1.Straight 2.hooked 3.Crimped.4.Double duoform 5.ordinary duoform 6.paddied 7.enlarged ends 8.irregular 9.indented.
Is there a difference between Micro and Macro Synthetic Fiber?
Macro synthetic fibers are intended to carry a load and therefore, can be used to replace traditional reinforcement. Typical applicationss are: slabs on ground, shotcrete, precast and composit metal deck applications. Macro synthetic fibers are also used to eliminate both early and long term cracking. Micro fibers are generally utilized to minimize early age plastic shrinkage cracking and aggregate settlement that can occur within the first 24 hours.
As a steel fiber supplier, we can offer sorts of related products for sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
Steel Fibers For Shotcrete | Steel fiber for shotcrete -SFRS Steel fiber reinforced shotcrete(SFRS-steel fiber reinforced shotcrete) is referred to as "steel shotcrete", which... |
 |
SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber | This fiber is a high-performance hooked steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a sub... |
 |
SDS Micro Copper Coated Steel Fiber | Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high ... |
 |
SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber | This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for gl... |
 |
Steel Fiber For Fatigue Resistance | Steel Fiber For Fatigue Resistance Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue propert... |
Same products
 |
Steel Searcher Steel Product & Hardware | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ... |
 |
Frac PU Layflat Hose | Seller: SUZHOU SEAPEAK CO.,LTD | The outer cover of our PU layflat hose has been produced with extra thickness for tough environme... |
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... |
 |
SDS Micro Copper Coated Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... |
 |
SDS Loose Hooked End Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... |
