COPPER CLADDED ELECTRODE ARM
The conductive electrode armis a new type of cross arm made of copper steel composite plate or aluminum steel composite plate, with a rectangular cross-section shape and internal water cooling. The electrode arm eliminates many insulation links between the water-cooled conductive copper tube, 2 electrode voltage clamp, and cross arm, greatly simplifying the cross arm structure in ultra-high power electric arc furnaces.
REQUIREMENT
REQUIREMENTS FOR CONDUCTIVE CROSS ELECTRODE ARM
Light weight, good stiffness, low impedance, and long service life.
One end of the conductive cross arm is supported on a column, and the other end is used to clamp the electrode, which has a lifting function. The lightweight of the conductive cross arm means that the driving power required for the electrode column to perform lifting and adjustment movements is relatively reduced, and so on.
STRENGTH
CHNBZTECH COPPER CLADDED ELECTRODE ARM STRENGTH
The hollow section and double-layer copper steel composite plate are adopted to greatly reduce the Skin effect, reduce the impedance and improve the electric heating efficiency;
As parts of electric furnace, the hollow cross-section box structure and internal water-cooled channel greatly enhance the strength of the cross arm, which is conducive to adjusting electrode movement without causing vibration and is conducive to arc stability;
The weight is lighter than traditional steel tube type cross arms, with small inertia, which is conducive to frequent electrode lifting and adjustment.
Send product request
Other supplier products
SLAG POT | SLAG POT Both ferrous and non-ferrous metallurgical enterprises produce a large amount of high-temperature liquid slag, and the vast majority of s... | |
Submerged ARC Furnace | The saf submerged arc furnace(SAF) is a specialized heating system utilized to produce a range of iron alloys using electric power. The smelting pr... | |
COPPER CLADDED ELECTRODE ARM | The conductive electrode armis a new type of cross arm made of copper steel composite plate or aluminum steel composite plate, with a rectangular c... | |
Secondary Refining Furnace | The steel refining process by secondary refining furnace can be divided into two categories: primary refining, aimed at removing carbon from pig ir... | |
SCRAP BUCKET | In steelmaking equipment, the scrap bucketis a device for loading scrap steel, used to inject scrap steel into the steelmaking furnace. The steel b... |
Same products
Steel Searcher Steel Product & Hardware | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ... | |
Frac PU Layflat Hose | Seller: SUZHOU SEAPEAK CO.,LTD | The outer cover of our PU layflat hose has been produced with extra thickness for tough environme... | |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... | |
SDS Micro Copper Coated Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... | |
SDS Loose Hooked End Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... |