WATER COOLED CABLE

• 

WATER COOLED CABLE

Large cross-section water cooled power cablesare used for the connection between the busbar system and the EAF arm, transmitting large currents and meeting the movement requirements of the cross arm, such as lifting and rotating. These liquid cooled cablesare mainly used for steelmaking the electric arc furnace, ladle refining furnace, and induction furnaces, and are also suitable for submerged arc furnaces after being covered with high-temperature resistant materials.

STRENGTH

CHNZBTECH WATER-COOLED WELDING CABLE STRENGTH

Cable heads are non-contact, solderless, and welded, made from a whole copper rod processed on CNC lathes and milling machines, which are beautiful and durable; The connection between electrodes and wires adopts cold extrusion, which does not damage the wires and has low resistance.

The outer sleeve is made of high-quality rubber hose, which has a water pressure resistance of>0.8MPA and a breakdown voltage of over 3000V. There is also a flame-retardant outer sleeve for users to choose from in special occasions;

The fastening between the electrode and the outer sleeve should be made of red copper clamps for cables below 500mm2, and 1Cr18Ni9Ti material clamps should be used for other cables, which are non magnetic and rust free; Squeezing and fastening with large hydraulic equipment, beautiful, durable, and with good sealing effect;

Soft wire is processed using fine enameled wire on a specialized winding machine. Soft, small bending radius, and large effective cross-section;

Using enameled wire as a water cooled cablehas high efficiency in energy transmission. Because each enamelled wire is insulated, conducting medium frequency and high frequency current, and has no surface Skin effect, compared with other water-cooled cables of the same section, when passing the same current, the heat generation is less;

Using enameled wire as the conductor for these wholesale furnace parts can improve the service life of the cables. Due to long-term immersion of the wires of water-cooled cables in water, the working environment is extremely harsh. Previously, we used copper bare wires to make water-cooled cables. After using the water-cooled cables for a period of time, when we opened the cable jacket, we would see a layer of green copper rust on the surface of the wires. Later on, we switched to using enameled wire as a water cooled cable for furnacebecause it has a protective layer of paint film, which can provide corrosion protection. Users have reported that water-cooled cables made of enameled wire have a service life of 1.5 to 2 times that of copper bare wires.

Now the price of steel furnace for saleis reasonable, anything you need, please contact us.

Other supplier products

	LOW CARBON FERROCHROME FURNACE	The main raw materials for smelting low-carbon ferrochromium using the electro silicothermic method include chromium ore, silicon chromium alloy, a...
	WATER COOLED CABLE	WATER COOLED CABLE Large cross-section water cooled power cablesare used for the connection between the busbar system and the EAF arm, transmittin...
	SCRAP BUCKET	In steelmaking equipment, the scrap bucketis a device for loading scrap steel, used to inject scrap steel into the steelmaking furnace. The steel b...
	Secondary Refining Furnace	The steel refining process by secondary refining furnace can be divided into two categories: primary refining, aimed at removing carbon from pig ir...
	EAF ROOF	In the past, the EAF (electric arc furnace) roof mostly used plate type fully water-cooled furnace covers, masonry furnace covers, or plate type se...

Same products

	Steel Searcher Steel Product & Hardware	Seller: STEEL SEARCHER HONG KONG LIMITED	Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ...
	Frac PU Layflat Hose	Seller: SUZHOU SEAPEAK CO.,LTD	The outer cover of our PU layflat hose has been produced with extra thickness for tough environme...
	SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber	Seller: Tengzhou Star Smith Metal Products Co.,Ltd	This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro...
	SDS Micro Copper Coated Steel Fiber	Seller: Tengzhou Star Smith Metal Products Co.,Ltd	Micro brass fibers are made of copper coated steel wire , which is the most important materials o...
	SDS Loose Hooked End Steel Fiber	Seller: Tengzhou Star Smith Metal Products Co.,Ltd	Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha...