Thermal power plant steel pipe with insulation layer
Steel sleeve insulation composite steel pipe is one of the pipes buried directly underground. It can be buried without the concrete structure, the steel pipe thermal expansion will be proceeded in the outside pipes, thus can lower the cost of the raw material, shorten the construction date and ensure the safety of the heating pipes. This kind of pipes can be used widely in various temperature environment, especially suitable for high temperature steam pipeline project. The operating temperature can be 150℃-450℃。
Other supplier products
|
|
Carbon Steel, Stainless Steel, and Alloy Steel Reducer |
The standard of the reducer: GB standard, EN standard, American standard and other non-standard high-pressure and low-pressure pressin |
|
|
NACE MR0175/ISO 15156 Steel pipe |
This standard applies to all components of equipment exposed to sour environments, where failure by SSC or SCC would (1) prevent the equipment from... |
|
|
ASTM A105 Flange (SW,BW), ASME B16.5 |
The flanges can be divided into threaded flange, welded flange, and clamp flange. Also according to the type, there are WN, SO, Blind flange. The f... |
|
|
ASTM A106 GR.B SMLS STEEL PIPE |
ASTM A106 seamless steel pipes are used for conveyance of oil, gas and other fluid. The yield strength is ≥240Mpa and tensile strength is ≥41... |
|
|
ASTM A106 GR.C SMLS STEEL PIPE |
ASTM A106 seamless steel pipes are used for conveyance of oil, gas and other fluid. The yield strength is ≥240Mpa and tensile strength is ≥41... |
All supplier products
Same products
