.

ASTM B165 UNS N04400 Seamless Tube

GRADE:UNS N04400 (Monel400)

STANDARD:ASTM B165

DENSITY:8.85g/cm³

SPECIFICATION of :

Out Diameter: 10-660mm

Wall Thickness: 0.6-50mm

CHEMICALREQUIREMENTS about :

:%

Grade

Composition,%

Ni

Cu

Fe

Mn

C

Si

S

N04400

MECHANICAL PROPERTY:

Material and Condition / UNS N04400

Tensile Strength,min MPa

Yield Strength(0.2% offset),min MPa

Elongation in 2 in. Or 50mm(or 4 D) min,%

Annealed

480

170

35

Stress Relieved

585

380

315

FEATURE of :

Corrosion resistance to reducing media,

Corrosion resistance of oxidizing medium,

Good corrosion resistance in fresh water, sea water and light brine.

APPLICATIONS of :

Heat exchange equipment,

Boiler feed water heater,

Pipelines and containers in processing such as petroleum and chemical industry,

Desalination equipment,

Salt production equipment, etc.



Send product request

To: Baosteel Special Metals Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

ASTM B690 UNS N08367 Seamless Pipe
ASTM B690 UNS N08367 Seamless Pipe GRADE:UNS N08367 STANDARD:ASTM B690 SPECIFICATION: Out Diameter: 3.2-863.6mm Wall Thickness: 0.6-50.8mm CHMICAL REQUIREMENTSabout : :% Max ...
ASTM B163 UNS N08800 Nickel Alloy Tube
ASTM B163 UNS N08800 Nickel Alloy Tube GRADE:UNS N08800 (Incoloy 800, Alloy 800) SIMILAR GRADES:Incoloy 800H/Incoloy 800HT. STANDARD:ASTM B163/ASME SB163 DENSITY:8.1g/cm³ SPECIFICA...
ASTM A789 Gerneral Service Stainless Steel Pipe
ASTM A789 Gerneral Service Stainless Steel Pipe The has good welding performance. Compared with ferritic stainless steel and , it is not like the welding heat affected zone of ferritic stainless...
ASTM B444 UNS N06852 Alloy Pipe
ASTM B444 UNS N06852 Alloy Pipe GRADE:UNS N06852 STANDARD:ASTM B444 / ASME SB444 SPECIFICATIONof : Out Diameter: 6.35-660mm Wall Thickness: SCH5-SCHXXS Other sizes are avai...
Nickel Based Alloy Tubes
Nickel Based Alloy Tubes are alloys that have a combination of high strength and certain resistance to oxidation and corrosion at high temperatures of 650 to 1000 °C. ...
All supplier products

Same products

API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t...
Pup Joint 2-7/8NUE N80 2FT Blast Joint
Pup Joint 2-7/8"NUE N80 2FT Blast Joint Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t...
NC50 PIN 4145H XT39 BOX Crossover
NC50 PIN 4145H XT39 BOX Crossover Seller: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
API 5CT 2-7/8NUE N80 Tubing Coupling
API 5CT 2-7/8"NUE N80 Tubing Coupling Seller: Tianjin Wenxin Energy Technology Co.,LTD API 5CT 2-7/8"NUE N80 Tubing Coupling Introduction NUE Thread Couplings are short lengths of pi...