8" SCH120 SMLS STEEL PIPE AS PER API 5L PSL1 X52 WITH EXTERNAL 3LPE COATING AS PER DIN30670
China manufacturer of 8" SCH120SMLS STEEL PIPEAS PER API 5L PSL1 X52 WITH EXTERNAL 3LPE COATING AS PER DIN30670
Standard: API 5L-2009 ISO 3183-2007 DIN 30670 ( Coating)
Steel Grades: Gr. B X42 X46 X52 X56 X60 X65 X70L245 L290 L320 L360 L390 L415 L450 L480
Size Range: OD:1/2” TO 36”. WT:3mm To 45mm
Coating Thickness: 2mm- 5mm
Manufacturing Process : Hot Rolled / ERW/LSAW
Application:The external coating is mainly used for anti-corrosion protection for liquid pipes before burying.Such pipes has been widely used in rugged environment
Packing: External Black Painting ,Both Side With End Caps, In Bundles by Steel Strips,Covered by Waterproof.
Nominal Size of Pipe | Minimum Thickness of Normal(n)Coating ,in mm |
Up to DN100 | 1.8 |
Over DN100 up to DN250 | 2.0 |
Over DN250 to Below DN500 | 2.2 |
From DN500 to Below DN800 | 2.5 |
From DN800 | 3.0 |
The minimum coating thickness shall be 0.7mm greater (reinforced(v)type)where coatings will be subjected to particularly high mechanical stress. Along any 1m length of pipe,the coating thickness maybe up to 10% less than the minimum required,provded the thinner area does not cover more than 5cm2 |
Send product request
Other supplier products
ASME B16.5 150lb SS316L Stainless Steel Slip on Flange | China Manufacturer of ASME B16.5 150lb SS316L Stainless Steel Slip on Flange Topper specializes in manufacturing Water Bottling Machine, Juice B... | |
API 5L GR.B Psl1 LASW ERW Spiral Welded Steel Pipe | China Manufacturer of API 5L GR.B Psl1 LASW ERW Spiral Welded Steel Pipe Product Name:Welded Steel PipeLength:5.8-12mSpecification::1/2"-72"Inspect... | |
Cold Drawn ASTM A312 Seamless Stainless Steel Round Tube/Pipe | China Manufacturer of Cold Drawn ASTM A312 Seamless Stainless Steel Round Tube/Pipe Standards: ASTM(ASME) (SA)A312/213/376 etcManufacturing method... | |
ASME B16.5 Weld Neck Flange ASTM A105 | ASME B16.5 Weld Neck Flange Plant in China: ASTM A105 Weld Neck Flange, Forging, ASME B16.5, 3 Inch, SCH 120, Class 150 LB, RF End, Oiled. Product... | |
ANSI DIN Standard A105 Carbon Steel Plate | China manufacturer of ANSI DIN Standard A105 Carbon Steel Plate Flat Face Pipe Slip On Flange Class 300 DN200 Manufacturing Method: ForgedPressure:... |
Same products
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... | |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... | |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... | |
NC50 PIN 4145H XT39 BOX Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... | |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | API 5CT 2-7/8"NUE N80 Tubing Coupling Introduction NUE Thread Couplings are short lengths of pi... |