Fire sleeve
500°F/260°CContinuous Exposure: Higher Intermittent
Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerospace AS1072 Grade Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerospace AS1072 Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Send product request
Other supplier products
 |
Titanium Thermo Exhaust Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent Titanium Thermo Exhaust Wrap Titanium Thermo Exhaust Wrapis made from pulverized la... |
 |
FIBERGLASS needle insulation felt | FIBERGLASS needle insulation feltis a mechanically bonded glass fiber insulation blanket of uniform density supplied in thicknesses of 3 mm to 50 m... |
 |
Aluminized Heat Shield Mat | Aluminized Heat Shield Matoffers an excellent way to reflect radiant heat away from a vehicle‘s interior and because of its flexibility, can ... |
 |
titanium Heat Pipe Ceramic Fiber Insulation | 1200°F / 648°C Continuous Exposure: Higher Intermittent titanium Heat Pipe Ceramic Fiber Insulation titanium Heat Pipe Ceramic Fiber Insula... |
 |
Steam Valve Insulation Jackets | Steam Valve Insulation Jacketsis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In part... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
