fiberglass fire sleeve
500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 GradeAerostylefiberglass fire sleeve
Aerostyle fiberglass fire sleevewas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade Fire Sleeve will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all BSTFLEX fire sleeve here
Fire Sleeve With Metal Snap Closure
Send product request
Other supplier products
 |
thermal protection heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent thermal protection heat sleeve Knitted high bulk glass fiber tube protection heat sle... |
 |
Titanium Header Exhaust Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent Titanium Header Exhaust Wrap Titanium Header Exhaust Wrapis made from pulverized la... |
 |
Compressor Insulation Blanket | Compressor Insulation Blanketis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In parti... |
 |
Basalt Braided Sleeve | Basalt Braided Sleeve withstand 1472 F/ 800 C continuous exposure.Basalt Fiber braided Sleeve is made of the braiding continuous basalt fiber.Worki... |
 |
fireproof high silica cloth heat resistant high silica fabric | fireproof high silica cloth heat resistant high silica fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposu... |
Same products
 |
Velcro Heat Sleeve | Seller: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone fire sleeveprovides the same protection against extreme heat conditions and occa... |
 |
Silicone Coated Fiberglass Tape | Seller: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone fiberglass tapeprovides the same protection against extreme heat conditions and ... |
 |
Silicone Coated Fiberglass Hose Fire Sleeve | Seller: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone heat sleeveis specialized in protecting wires, cables, hoses, oil lines from ext... |
 |
Silicone Coated Basalt Sleeve | Seller: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone coated fiberglass sleeveis specialized in protecting wires, cables, hoses, oil l... |
 |
Nylon Sleeve For Wires | Seller: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE Nylon sleeve for wiresis specialized in protecting wires, cables, hoses, oil lines from h... |
