Fire Protection Fiberglass Sleeving

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Fire Protection Fiberglass Sleevingis a common term for a Silicone coated fiberglass sleeve, generally used in industrial or aerospace applications.

Fiberglass acts as an insulator or barrier for constant temperatures up to 540ºC. Silicone is generally able to withstand temperatures up to about 260C degrees continuous. Silicone, however, has the added benefit of being able to withstand and repel much higher temperatures for short durations, including liquid molten metals.

Fire Protection Fiberglass Sleevingis used as a protective sleeve on industrial hoses, hydraulic hoses, cables, wires, etc.

Fire Protection Fiberglass Sleevinggenerally refers to two variations: An aerospace version is made with a braided fiberglass substrate and is commonly used in the aerospace industry. Its construction enables qualified hose assemblies to meet the SAE standards which have been established relative to the protection which this product provides.

An industrial version, constructed of a knitted fiberglass substrate is also available. Because it is less expensive it is more commonly used in hot industrial applications where this type of protection is needed. The industrial version will not meet the SAE standards.

Fiberglass sleeve—without the Silicone rubber coating—has a higher continuous temperature rating, up to 1000ºF or 540ºC and is available as a knitted or braided sleeve for protection of hoses and cables where molten splash protection or weld splatter protection is not required.

Fire sleeve is used for industry, aerospace, automotive, mining.

Other supplier products

	Aluminum Coated Fiberglass Fabric	Aluminum Coated Fiberglass Fabric reflects radiant heat and is the perfect protection for covering equipment that is in close proximity to intense ...
	hydraulic protection heat sleeve	500°F/260°C Continuous Exposure: Higher Intermittent hydraulic protection heat sleeve Knitted high bulk glass fiber fire sleeve can withst...
	Silicone rubber self fusing tape	Silicone rubber self fusing tapeis the Original self-fusing silicone insulating & repair wrap. Hose repairs Silicone Rescue rubber tape is ex...
	Thermal Insulation Valve Jacket	Thermal Insulation Valve Jacket is used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In pa...
	Woven Silica Fabric	Woven Silica Fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), woven si...

Same products

	Nylon Head Hot Dip Galvanized Spindle For Pin Insulator	Seller: Electric Powertek Company Ltd	Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
	ANSI C29.5 55-4M Pin Insulator for Bangldesh	Seller: Electric Powertek Company Ltd	The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
	Ground Wire Glass Insulator	Seller: Electric Powertek Company Ltd	Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
	Phenolic Thermal Insulation Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...