Thermal Reflective Sleeve
1000°F / 537°C Continuous Exposure: Higher Intermittent
Thermal Reflective Sleeve
Aluminum Coated Fiberglass Reflect Sleeveis made by braided fiberglass sleeve laminated aluminum foil.
Performance lab tested at 3000°F (1650°C) for 1 minute, BST Thermal Protective Aluminized Glass Fiber Heat Reflect Sleeve reflects at least 90% of radiant heat energy.
Thermal Reflective Sleevecan be used to protect industrial wires, cables, hydraulics hoses, piping and tubing from radiant heat sources such as glowing steel slab, liquid metal pour stream, infrared heaters and other similar sources.
Performance lab tested at 3000°F (1650°C) for 1 minute, this sleeve reflects at least 90% of the radiant energy that hits its surface, keeping the underlying cables and hoses cool.
Aluminum Coated Fiberglass Reflect Sleeveis available in sizes from 2/5 " through 18,1/2 ".
Aluminum Coated Fiberglass Reflect Sleevecan be cut into required lengths. Larger sizes are available under special order.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all heat reflective sleeve here
AluminumAramid Heat Reflective Sleeve with Velcro
AluminumAramid Heat Reflective Sleeve
Connector Heat Shield
Heat Reflective Sleeve with Snap
Heat Reflective Sleeve self-wrapped
Heat Reflective Sleeve sewn type
Polyester Aluminized Fiberglass Heat Reflective Sleeve
Aluminized Polyester Wool Heat Reflective Sleeve
Aluminized Polyester Wool Heat Reflective Sleeve sewn
Heat Reflective Sleeve Wrap
Heat Reflective Sleeve with Velcro
Polyester Aluminized Heat Reflective Sleeve
Aluminized Woven Fiberglass Heat Reflective Sleeve
Impregnated Aluminum Heat Reflective Sleeve
Send product request
Other supplier products
 |
silicone coated fiberglass thermosleeve | 500°F/260°C Continuous Exposure: Higher Intermittent silicone coated fiberglass thermosleeve Knitted high bulk glass fiber fire sleeve can... |
 |
Titanium Exhaust Pipe Wrap Tape | 1200°F / 648°C Continuous Exposure: Higher IntermittentTitanium Exhaust Pipe Wrap Tapeis made from pulverized lava rock and stranded into a... |
 |
Graphite black header wrap | Graphite black header wrap withstands continuous heat up to 2000°F, and contains no asbestos. Special coating provides more abrasion resistance... |
 |
Exhaust Header Titanium Exhaust Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent Exhaust Header Titanium Exhaust Wrap Exhaust Header Titanium Exhaust Wrapis made fr... |
 |
silicone thermosleeve | 500°F/260°C Continuous Exposure: Higher Intermittent silicone thermosleeve Knitted high bulk glass fiber fire sleeve can withstand repeate... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
