Fiberglass Insulation Sleeve
1000°F / 520°C Continuous Exposure: Higher Intermittent
Fiberglass Insulation Sleeve
This Braided Fiberglass Sleevewill conform to shapes with changing geometries. Great for use in prosthetics, hockey sticks and much more. It can be slid over a prepared mandrel or tube to create straight or tapered tubing. Braided Fiberglass Biaxial Sleeve can be increased from their base diameter up to 30% and decreased up to 70%.
Fiberglass Insulation Sleeveeasily and repeatedly expands open to fit over molding tools or cores. They can accommodate straight, uniform cross-section forms as well as non-linear, irregular cross section components.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
Send product request
Other supplier products
 |
Exhaust Pipe Heat Shield | Armor Exhaust Heat Shield is designed to provide the best possible heat protection in areas where high temperatures are always present and problema... |
 |
silica tape with adhesive backing | heat resistant silica tape with adhesive backing is a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure... |
 |
Woven Silica Fabric | Woven Silica Fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), woven si... |
 |
Thermal Removable Insulation Covers | Thermal Removable Insulation Coversis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In... |
 |
titanium exhaust wrap | BSTFLEX provide special V Titanium Exhaust Wrap, same material as other titanium exhaust wrap. Titanium Exhaust Wrap is extremely durable and capa... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
