Floor and Tunnel Shield
Floor and Tunnel Shieldis designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Heatshield Thermal Barriers limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor and Tunnel Shieldprovides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, INSULATION EXTREME HEAT BARRIER withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
With a unique and patented finely woven glass-fiber backing, Heat shield thermal barriers is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Automotive Heat Barrier Insulationcan be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.
Use as a barrier to reflect and insulate from any heat source.
Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
Blocks radiant heat from entering driver compartment
Withstands direct high heat temperatures up to 1750°
Serves as a barrier to unwanted road, tire, & engine noise
Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
Easy to form to shapes and contours
Excellent heat & sound barrier
Wind and water will not affect adhesive
Minimum clearance required, only 3/16” thick
Just trim, peel & stick
Aggressive self-adhesive backing holds past 450°F
Withstands 1750°F direct continuous heat
Use to shield & reflect unwanted heat
Multiple uses
Adheres to almost any surface or material including to fiberglass
Send product request
Other supplier products
 |
Basalt Braided Sleeve | Basalt Braided Sleeve withstand 1472 F/ 800 C continuous exposure.Basalt Fiber braided Sleeve is made of the braiding continuous basalt fiber.Worki... |
 |
Mining Equipment Thermal Insulation blanket | Mining Equipment Thermal Insulation blanketis used to insulate engine parts, exhaust piping and components, and industrial process piping and machi... |
 |
Heat Barrier Shield Thermo-Sleeve | 1000°F / 537°C Continuous Exposure: Higher Intermittent Heat Barrier Shield Thermo-Sleeve Aluminum Coated Fiberglass Reflect Sleeveis made ... |
 |
Fiberglass Silicone Sleeving | 500°F/260°CContinuous Exposure: Higher Intermittent Silicone rubber coated fiberglass sleeve Aerospace AS1072 Grade Fire Sleeve was special... |
 |
turbo heat shield blanket | BSTFLEX turbo heat shield blanketMaterials: -Silicone Impregnated Fiberglass Outer Shell -Calcium Magnesium Silicate Wool Inner Core (secured with ... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
