Silicone rubber glass fiber insulation sleeve
500°F/260°CContinuous Exposure: Higher Intermittent
Silicone rubber glass fiber insulation sleeve
Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Silicone rubber glass fiber insulation sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Fiberglass Silicone Sleevingwithstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Fiberglass Silicone Sleevingwill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
silicone Fiberglass Insulating Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
ProudlyMadeByBSTThermalProtectionProductsCo.,Ltd
| Inside diameter - mm | Inside diameter tolerance -mm | Thickness and tolerance - mm |
| 4-10 | ± 0.3 | 3.0± 0.2 |
| 12-18 | ± 0.4 | 3.5± 0.3 |
| 20-32 | ± 0.8 | 4.0± 0.4 |
| 35-55 | ± 1.0 | 4.3 ± 0.5 |
| 60-100 | ± 1.0 | 4.5 ± 0.5 |
| 105-150 | ± 1.0 | 5.5± 0.5 |
|
Thermo Fire Braided Sleeve- Quick Facts | |
|---|---|
|
Custom colours available by special order. |
|
|
Continuous operating temp: |
500°F (260°C) |
|
Max short term exposure: |
3000°F (1650°C) |
|
Molten splash resistance: |
Outstanding |
|
Flame resistance: |
Very good |
|
Abrasion resistance: |
Very good |
|
Flexibility: |
Outstanding |
|
Water and oil resistance: |
Outstanding |
Send product request
Other supplier products
 |
Exhaust Heat Proof Mat | Heat Screen Aluminized Heat Barrier offers an excellent way to reflect radiant heat away from a vehicle‘s interior and because of its flexibi... |
 |
fuel line protection heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fuel line protection heat sleeve Industry Fire sleeve is designed to protect hoses,wir... |
 |
Exhaust Pipe Heat Shield Wrap | 1200°F / 648°C Continuous Exposure: Higher IntermittentExhaust Pipe Heat Shield Wrapis made from pulverized lava rock and stranded into a f... |
 |
Custom fabricated Exhaust Pipe Insulation Blanket | Custom fabricated Exhaust Pipe Insulation Blanket systems for engine and generator exhaust components such as mufflers, turbo-chargers and pipe fea... |
 |
silicone rubber fiberglass braided fire protection sleeve | silicone rubber fiberglass braided fire protection sleeve is designed to protect hoses,wires and cables from the hazards of high heat and occasiona... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
