Exhaust Pipe Heat Shield
Armor Exhaust Heat Shield is designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Heatshield Thermal Barriers limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Tunnel Heat Shield provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Heatshield Thermal Barriers withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
With a unique and patented finely woven glass-fiber backing, Heat shield thermal barriers is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Armor Exhaust Heat Shield can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.
Use as a barrier to reflect and insulate from any heat source.
Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
Blocks radiant heat from entering driver compartment
Withstands direct high heat temperatures up to 1750°
Serves as a barrier to unwanted road, tire, & engine noise
Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
Easy to form to shapes and contours
Excellent heat & sound barrier
Wind and water will not affect adhesive
Minimum clearance required, only 3/16” thick
Just trim, peel & stick
Aggressive self-adhesive backing holds past 450°F
Withstands 1750°F direct continuous heat
Use to shield & reflect unwanted heat
Multiple uses
Adheres to almost any surface or material including to fiberglass
Send product request
Other supplier products
 |
cable protection firesleeve | STEEL WORK / METAL SMELTING cable protection firesleevewith heavy silicone coatings have proved to be ideal for protecting cables and components fr... |
 |
thermosleeve fiberglass braided sleeve | 1000°F / 520°C Continuous Exposure: Higher Intermittent thermosleeve fiberglass braided sleeve This Braided Fiberglass Biaxial Sleeving wi... |
 |
Industrial Thermal Blanket Insulation | Industrial Thermal Blanket Insulation is used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery.... |
 |
Hose and line fire sleeving | 500°F/260°C Continuous Exposure: Higher Intermittent Hose and line fire sleeving Hose and line fire sleevingis designed to protect hoses... |
 |
black colored silicone fiberglass braided fire sleeve | 500°F/260°C Continuous Exposure: Higher Intermittentblack colored silicone fiberglass braided fire sleeve Fire sleeve with velcro is knitte... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
