Silica fiber braided sleeve for hose wire line cable heat protection
1800 °F/982°CContinuous Exposure: Higher Intermittent
Silica fiber braided sleeve for hose wire line cable heat protection
Braided 96% pure silica fiber, the health conscious alternative to asbestos and ceramic sleeves and wraps.
Outstanding durability and flexibility
Silica Fiber Braided Sleeve set the standard for flexibility and minimum lineal shrinkage under high heat conditions. Durability is further enhanced with a proprietary hydro-carbon coating, giving Silicaflex firesleeves unmatched abrasion resistance and tensile strength.
Excellent high-heat performance
Silica Fiber Braided Sleeve is a braided silica sleeve, constructed from a 96% pure SiO2 silica fiber, suitable for continuous use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C).
woven Silica Sleeve can be combined with other low cost sleeve products to increase insulation values or abrasion resistance for the most demanding applications.
ProudlyMadeByBSTThermalProtectionProductsCo.,Ltd
|
Silica Fiber Braided Sleeve - Quick Facts | |
|---|---|
|
Diameters 1mm up to 150mm |
|
|
Standard lengths: |
30m |
|
Continuous operating temp: |
1800°F (982°C) |
|
Max short term exposure: |
3000°F (1650°C) |
|
Molten splash resistance: |
Good |
|
Weld spatter resistance: |
Excellent |
|
Flame resistance: |
Outstanding |
|
Abrasion resistance: |
Moderate |
|
Flexibility: |
Outstanding |
|
Tensile strength: |
Outstanding |
|
Water and oil resistance: |
Moderate |
Send product request
Other supplier products
 |
fiberglass braided heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fiberglass braided heat sleeve Knitted high bulk glass fiber fire sleeve can withstan... |
 |
Engine Exhaust Pipe Insulation Blanket Jacket Cover | Engine Exhaust Pipe Insulation Blanket Jacket Coveris used to insulate engine parts, exhaust piping and components, and industrial process piping a... |
 |
Silica Fiber Insulation Felt | BST-SIM Silica Fiber Insulation Felt made by 96% silica fiberglass chopped strand through carding and needling process. Excellent insulation for sa... |
 |
Hot air duct repair Primary insulator for high temperature Self fusing Tape Silicone Tape Rescue | Hot air duct repair Primary insulator for high temperature Self fusing Tape Silicone Tape Rescueis the Original self-fusing silicone insulating &... |
 |
silicone rubber fiberglass braided thermosleeve | 500°F/260°C Continuous Exposure: Higher Intermittent silicone rubber fiberglass braided thermosleeve Knitted high bulk glass fiber fire sl... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
