ceramic fiber blanket for pump insulation
1000°F / 537°C Continuous Exposure: Higher Intermittent
ceramic fiber blanket for pump insulation
We make different heat shield, like turbo heat shield, Exhaust Blanket, Engine Insulation Jacket.
We make different heat shield, like turbo heat shield, Exhaust Jacket.
removable thermal blanket insulationflanges, and sight glasses and also any equipment that has to be repaired/serviced in remote areas where insulation contractors are not readily available.
WewillFabricateJacketforanyRiser,Elbow,Muffler,orTube.SameasSampleorPerDrawing.
Cost saving– up to 25-40% of energy bills
Heat reducing – protection from heat fatigue and possible skin burns
Easy maintenance - easy fitting and removal for maintenance and cleaning
Fireproof materials– inflammability fabric and insulation
Custom made– well fitted with every machine and area
Competitive price– save more, pay less – rapid payback saving time
Allturbo heat shield and exhaust pipe heat shieldis designed from the customers,and the general materials are:
Inside– this layer contact directly with heated surface, and we normally usefiberglass
cloth (600 C)orsilica cloth (1200 C)as our main materials – sometimes it depends on
customer’s requirements also
Middle– this layer is also important for protecting heat lost, so we regularly use both
fiberglass wool,rock wool and ceramic wool.
Outside– this layer is shown outside on the top level; generally, it is fabricated by
waterproof fabricsuch asglass cloth with silicone coatedorPTFE
(Polytetrafluoroethylene)to avoid water or fluid damaging insulating material
Note :ourPipe Jacket Insulationcan be changed to other materials by customer’s
suggestions and ideas to fit their applications and budgets.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
Send product request
Other supplier products
 |
Thermo Sleeve Heat Shield | 1000°F / 537°C Continuous Exposure: Higher Intermittent Thermo Sleeve Heat Shield Aluminum Coated Fiberglass Reflect Sleeveis made by braid... |
 |
Electric fence insulation wrap Wire rope wrapping all purpose repair Self fusing Tape Silicone Tape Rescue | Electric fence insulation wrap Wire rope wrapping all purpose repair Self fusing Tape Silicone Tape Rescueis the Original self-fusing silicone in... |
 |
fuel line protection heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent fuel line protection heat sleeve Knitted high bulk glass fiber fire sleeve can withst... |
 |
Heat Reflective Glass Fiber Sleeve | Heat Reflective Glass Fiber Sleeveis non-alkali fiberglass braided sleeve coated with special inorganic reflective compound silicone rubber. Heat R... |
 |
Silicone Resin Coated Fiberglass Sleeving | 500°F/260°C Continuous Exposure: Higher Intermittent Silicone Resin Coated Fiberglass Sleeving Knitted high bulk glass fiber fire sleeve ... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
