Removable boiler insulation material
1000°F / 537°C Continuous Exposure: Higher Intermittent
Removable boiler insulation material
We make different heat shield, like turbo heat shield, Exhaust Blanket, Engine Insulation Jacket.
We make different heat shield, like turbo heat shield, Exhaust Jacket.
removable thermal blanket insulationflanges, and sight glasses and also any equipment that has to be repaired/serviced in remote areas where insulation contractors are not readily available.
WewillFabricateJacketforanyRiser,Elbow,Muffler,orTube.SameasSampleorPerDrawing.
Cost saving– up to 25-40% of energy bills
Heat reducing – protection from heat fatigue and possible skin burns
Easy maintenance - easy fitting and removal for maintenance and cleaning
Fireproof materials– inflammability fabric and insulation
Custom made– well fitted with every machine and area
Competitive price– save more, pay less – rapid payback saving time
Allturbo heat shield and exhaust pipe heat shieldis designed from the customers,and the general materials are:
Inside– this layer contact directly with heated surface, and we normally usefiberglass
cloth (600 C)orsilica cloth (1200 C)as our main materials – sometimes it depends on
customer’s requirements also
Middle– this layer is also important for protecting heat lost, so we regularly use both
fiberglass wool,rock wool and ceramic wool.
Outside– this layer is shown outside on the top level; generally, it is fabricated by
waterproof fabricsuch asglass cloth with silicone coatedorPTFE
(Polytetrafluoroethylene)to avoid water or fluid damaging insulating material
Note :ourPipe Jacket Insulationcan be changed to other materials by customer’s
suggestions and ideas to fit their applications and budgets.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
Send product request
Other supplier products
 |
Silicone rubber coated fiberglass sleeve | 500°F/260°CContinuous Exposure: Higher Intermittent Silicone rubber coated fiberglass sleeve Aerospace AS1072 Grade Fire Sleeve was special... |
 |
Water Tank Insulation Blanket | Water Tank Insulation Blanketis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In parti... |
 |
Insulock Removable Thermocovers | Insulock Removable Thermocoversis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In par... |
 |
High Temperature Fiberglass Sleeve | 1000°F / 520°C Continuous Exposure: Higher Intermittent High Temperature Fiberglass Sleeve This Braided Fiberglass Biaxial Sleeving will ... |
 |
fireproof silica fiber glass cloth | fireproof silica fiber glass clothis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650&d... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | Seller: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | Seller: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | Seller: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | Seller: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
