.

 Black Steel Grating Stair Treads 

T3 Steel Grating Stair TreadsBlack Steel Grating Stair TreadsSteel Grating Stair Treads for transportationOur company produces completesteel ladderswith hand railings which are made of grating treads. According to whether the nosing to be used and the methods of mounting to stringers, grating treads are classified into four types, expressed as T1,T2,T3andT4. In view of economics it is advisable to use the recommended lengths and widths belowSPECIFICATIONST1 Welded Fixingwithout Nosing

Type of Stair Treads

Checkered plate nosing

Structure Characteristics

T3

YES

For installation by welding, the two ends are closed with flat bars which are the same the bearing bars in length With checkered plate nosing.

Recommended Stair Treads Width

T1,T2,T3,T4Bearingbarat30mmpitch

95

125

155

185

215

245

275

T1,T2Bearingbars40mmpitch

125

165

205

245

285

T3,T4Bearingbars40mmpitch

115

155

195

235

275

Fixingholecenters

45

75

100

150

Grating Size

Grade

CN: Q235, Q345, USA: A36, UK: 43A

Standard

CN: YB/T4001-1998, USA: ANSI/NAAMM, UK: BS4592-1987, AUS1657-1988, JJS

Certification

CE, GOST, ISO9001, ISO14001, HSE

Bearing bar type

Plain, Serrated (tooth-like), I bar (I section), Serrated-I

Bearing bar size

20X5, 25X3, 25X4, 25X5, 30X3, 30X4, 30X5, 32X3, 32X5, 40X5, 50X4.75X8,100X8mm,etc

Bearing bar pitch

20,25,30,32.5,34.3,40,50,60,62,65mm

Cross bar size

5X5, 6X6, 8X8mm (twisted bar)/5, 6, 8mm ( round bar)

Cross bar pitch

0, 50, 60, 65, 76, 100, 101.6, 120, 130mm, etc.

Panel size

3x20ft,3x24ft,3x30ft,5800x1000,6096x1000,6400x1000, as request

Surface treatment

Untreated, hot dip galvanized, cold dip galvanized, painted, powder coated,pickling, electrolytic polishing, or as customers' requirement.

Galvanization Standard

CN: GB/T13912, USA: ASTM (A123), UK: BS729

Color

Silver/Black

Application

petroleum and chemical, port, power, transportation, papermaking, medicie, steel and iron, food, municipality, real estate, manufacturing

SURFACE TREATMENT

Three ways of surface treatment can be adopted: galvanizing, painting and untreated, of which hot- dip galvanizing is recommended.

Hot-dip galvanizing

It is a form of galvanization. It is a process of coating steel grating with a thin zinc layer. By passing the metal through a molten bath of zinc, the average coating thickness is 70μm when steel bards range from 3mm to 5mm in thickness.

Painting

It is also a good way to get surface protective film. Coating thickness depends on the customer's choice.



Send product request

To: Yantai Haorui Metalwork Co.,Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

 port Steel Grating Stair Treads Supplier 
 port Steel Grating Stair Treads Supplier  Plain Type Steel Gratingport Steel Grating Stair Treads Supplierport Steel Grating Stair TreadsQUALITY STANDARDS GratingStandard Material ...
 type steel grating clamps
 type steel grating clamps type steel grating clamps Plain Type Steel Grating Manufacturerchemical Plain Type Steel Grating FactoryQUALITY STANDARDS GratingSt...
 T3 Steel Grating Stair Treads 
 T3 Steel Grating Stair Treads  Painted Steel GratingT3 Steel Grating Stair TreadsT2 Steel Grating Stair TreadsSPECIFICATIONS Table 1: Specifications ofWelded Steel Grating...
 I Type Steel Grating
 I Type Steel Grating I Type Steel Grating,Hot dip galvanized Steel Grating,Untreated Steel GratingHot dip galvanized Steel GratingUntreated Steel GratingSteel GratingQU...
T3 Steel Grating Stair Treads
T3 Steel Grating Stair Treads T3 Steel Grating Stair Treads,Black Steel Grating Stair Treads,Steel Grating Stair Treads for transportationBlack Steel Grating Stair TreadsSteel G...
All supplier products

Same products

Structural Steel Pipe Wholesale Exporter
Structural Steel Pipe Wholesale Exporter Seller: STEEL SEARCHER HONG KONG LIMITED Steel Searcher-Steel Pipehaving a hollow section much longer than its diameter or circumference. ...
Medical Instrument Parts from PTFE
Medical Instrument Parts from PTFE Seller: DONGGUAN SIBAI METAL WORKS LIMITED Medical Machined Partsfrom PTFE Sibai ensures High quality, short lead time, and on-time deliver...
METAL FLANGING
METAL FLANGING Seller: Wuhu Hunkmachining Accessory CO.,Ltd Flanging refers to the stamping process of turning the edge or outer edge of the hole on the work...
AJ25 Abrasive Cloth
AJ25 Abrasive Cloth Seller: ZIBO RIKEN MT COATED ABRASIVES CO., LTD. RIKEN RMC Jwt cloth AJ25, the Jwt poly-cotton cloth with the calcined aluminum oxide, is flexible...
BM6 High Pressure Motor
BM6 High Pressure Motor Seller: Hebei Golden-hammer forgings co., ltd What is BM6 high pressure hydraulic motor? BM6 hydraulic motor is a face-end flow, pressure-comp...