.

LoaderZL50G

LoaderZL50G
Produced by: Qingdao Sentaida Construction Machinery Co.,Ltd

All supplier products
Send product request

Category Items Value
operating weight kg 3000
Static linear load£¨front/rear£© N/cm 107/181
Speed km/h 2/5.6
gradeability in theory % 20
min.turning radius(L/R) mm 3065/4200
Min.ground clearance mm 200
wheel base mm 2150
Steering angle ¡À¡ã 33
Swing angle ¡À¡ã 10
Vibration frequency Hz 50
Vibration system-max.pressure Mpa 18
Steering system-max.pressure Mpa 16
Nominal amplitude£¨high/low£© mm 0.5
Centrifugal force KN 30
Compacting width mm 1000
Drum diameter mm 750
Engine Model ZN385Q
Rated engine speed r/min 2400
Rated engine power kw 21
Overall Dimensions (length*Width*Height) mm
Technical specifications are subject to change without notice

Fully hydraulic powered steering with flow amplified system.Pilot operated control for loader hydraulic system,power shift(electric shift optional)transmission makes convenient and flexible operating.

XCMG new Z-bar linkage,high breakout force,shorter hydraulic cycke time,
automatic leveling on any position,and greater productivity.

Special quadrat type transmission shaft of construction machinery.
Power transmission is more reliability.

Integral new luxury cab,excellent sight,safety and reliability,
sound insulation,with air conditioner.

EG-TM combination is supported on three points by dual directions.
Vibracation isolators,reducing resonance and fatigue failure of structure.

Optimized structure of diesel engine air intake system reduces
dust into air filter.prolonging the durability of engine,conveniencing
the service of air filter element,optimized cooling system drops overall
heat balance temperature.

Inernal openable hood,made by compound material,reduces noise and vibration,
makes convenient and flexible operation and service.
Category Items Value
Description Unit PARAMETER
Bucket capacity m3 3.0
Rated load kg 5000
Dumping clearance mm 3090
Dumping reach mm 1130
Max. breakout force kN 170
LxWxH mm 8110x3000x3485
Operating weight kg 17500
Raising time s 6
Total cycling time s 11
Max drawing force KN 145
Articulated angle % 35
Min. truning radius mm 6400
Clime ability % 28
wheel base mm 3300
Tread mm 2200
Travelling speed km/h 11.5/16.5 1st(F/R)
Travelling speed km/h 37 2nd(F)
Engine model WD615G.220
Rated power/speed kW/r/min 162/2200
Tyre 23.5-25-16PR
Technical specifications are subject to change without notice

Send product request

To: Qingdao Sentaida Construction Machinery Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Asphalt Concrete Paver RP701J
 Asphalt Concrete Paver RP701J Category Items Value Basic Working Width m ...
Mechanical drive single drum vibratory rollersXD30J
 Mechanical drive single drum vibratory rollersXD30J Category Items Value operating weight kg ...
Mechanical drive single drum vibratory rollersXS142J
 Mechanical drive single drum vibratory rollersXS142J Category Items Value working mass kg ...
LoaderZL50G
 LoaderZL50G Category Items Value operating weight kg ...
Tandem Vibratory RollerYZC7
 Tandem Vibratory RollerYZC7 YZC7, is a tandem vibratory roller, which is mainly suited for asphalt-concrete and cement-concrete s...
All supplier products

Same products

AEMK 588 Loader
 AEMK 588 Loader Seller: AEMK MACHINE CO.,LTD Cab Height :2670mm Overall Dimensions ( L * W * H ):5700*2000*2670mm Front Wheel Counterweight ...
Quick Change Worktable
 Quick Change Worktable Seller: Nextas Co.,Ltd Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE...
Self Centering Vise
 Self Centering Vise Seller: Nextas Co.,Ltd Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ...
BDS Positioning Chuck
 BDS Positioning Chuck Seller: Nextas Co.,Ltd BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that...
Quick Change Pallet System
 Quick Change Pallet System Seller: Nextas Co.,Ltd Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m...