Truck crane QY35K
QY35K Truck Crane outline profile and hydraulic system won 6 China state patents.
4-section boom of all-round octagonal boom profile, low center of gravity, good stability.
Single cylinder for front support elevation, and no side bending for boom.
Main and auxiliary winches are independent each other, work not only individually but also simultaneously.
Full-width drivers cab with wide vision is convenient for operation.
Swing system with free-sliding function automatically align to load. Pinion offset makes meshing clearance easy to adjust.
New materials are used to minimize the vehicle total weight and maximize the whole vehicle performances. Main performances are in the leading position in the industry.
Hydraulic pilot control system realizes all operations precisely with softly pushing the two joysticks on armrest (mechanical operation system for option).
Hydraulic valve block is integrated modular designed, little pressure loss and high work efficiency.
Counterbalance valve designed with international technology, oil filter, anti-cavitations device and plug in hydraulic circuit make operation more reliable.
Well-equipped safety devices such as automatic load moment limiter, hoist limit switch, and wire rope over-release cut-out device make operation more safe.
Engine, air conditioner for superstructure and carrier and hydraulic device are available for option
Category Items Value
Overall dimension mm 12610x2500x3280
Wheelbase mm 1520(axle1,axle2)
Wheelbase mm 3815(axle2,axle3)
Wheelbase mm 1350(axle3,axle4)
Total mass in travel state kg 32300
Front axle load kg 11150
Rear axle load kg 21120
Max.travel speed km/h 72
Min.stable travel speed km/h 3
Min. turning diameter m 22
Min.turning diamter at boom tip m 25
Min.ground clearance mm 260
Approach angle % 16
Departure angle % 15
Braking distance(at 30km/h) m 10
Max.grade-ability % 30
Fuel consumpation for 100km L 36
Engine model WD615.67A
Engine rated output kW/(r/min) 206/2200
Engine rated torque N.m(r/min) 1100/1400
Engine rated speed rmp 2200
Max. total rated lifing capacity t 35
Min rated working radius m 3
Turning radius at turntable tail m 3.055
Base boom at max. load moment kN.m 1166
Fully extended boom at max. load moment kN.m 645
Fully extened boom+jib at max.load moment kN.m 475
Longitudinal of outrigger span m 5.35
Lateral of outrigger span m 6
Base boom height m 10.5
Fully extended boom m 33
Fully extended boom+jib m 48
Technical specifications are subject to change without notice
Send product request
Other supplier products
 |
Asphalt Concrete Paver RP701J | Category Items Value Basic Working Width m ... |
|
|
Mechanical drive single drum vibratory rollers XD30J | Category Items Value operating weight kg ... |
 |
Truck craneQY20B | QY20B uses self-made truck crane special chassis, with covered decking plate and powerf... |
|
|
Mechanical drive single drum vibratory rollersXS142J | Category Items Value working mass kg ... |
|
|
LoaderZL50G | Category Items Value operating weight kg ... |
Same products
|
|
AEMK 588 Loader | Seller: AEMK MACHINE CO.,LTD | Cab Height :2670mm Overall Dimensions ( L * W * H ):5700*2000*2670mm Front Wheel Counterweight ... |
 |
Quick Change Worktable | Seller: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | Seller: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | Seller: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | Seller: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
