Climbing Elevator Shaft Concrete Placing Booms: HGD28、HGD32II、HGD38B
Climbing Elevator Shaft Concrete Placing Booms: HGD28、HGD32II、HGD38B
Main Features:
1. The structure of boom is optimized by adopting advanced design and technologies such as finite element analysis, dynamics emulate, model analysis, sample machine test, etc. Imported high strength steel ensures high quality and reliability;
2. Key components such as boom and vertical column adopt overall heat treatment to control residual stress and deformation efficiently;
3. Through assembly welding, the vertical column is of high interchangeability;
4. With the proportional control technology applied in multi-valve, the change of boom's motion speed can be changed at random by adjusting the angle of driving handle, which is of superior operating performance;
5. With remote control distance up to 100 meters and four optional frequency ranges, simple and reliable operation could be carried out;
6. Diversified installation modes of the boom includes floor type, elevator shaft type, wall type, ship mounted type and tower type;
7. The embedded parts can be recycled;
8. Two inter-locked working status of placing and climbing enhances the safety and reliability of climbing process;
9. Application of double-layer anti-friction transfer pipe, with a service life up to 30,000-50,000 cubic meters, which is 3-5 times of normal pipe;
10. Hydraulic system adopts double-pump variable flow control technology;
11. The second generation placing boom for elevator hoistway installation can be applied for floor installation and elevator hoistway installation; when it is applied for elevator hoistway installation, the retractable outrigger technology is suitable for elevator hoistway with dimension of 2.0- 2.7mand the climbing frame is fully auto-lifted by motor hoist.
Model HGD28 HGD32II HGD38B
Max. placing radius 28m(91′10″) 32m(104′12″) 38.8m(126′24″)
Rotation of boom 365°
Operating ambient temperature -10～+45℃
Tower height 30m(98′5″) 24m(79′9″)
Installation mode Elevator hoistway
Climbing speed 0.5～0.8m/min(1.6-2.6′/min)
Climbing mode Cylinder lifting-up type
Motor model Y200L4, B35, IP44 Y225S-4-H B36 IP44
Power 30kw(40HP) 37kw(49HP)
Rotary speed 1450rpm(152.25rad/s)
System pressure 30Mpa(4350psi)
Flow 47L/min(13gal/min)
Oil tank capacity 300L(79.3gal)
Control mode Close-control/wire/remote control
Pipeline cleaning mode Wet cleaning/dry cleaning
Total mass 28500kg(62831 lbs) 31500kg(69446 lbs) 32000kg(70548 lbs)
Boom type 4 convolution fully hydraulic 5 convolution fully hydraulic
Diameter of delivery pipe DN 125mm(5″)
End hose length 3m(9′10″)
The 1st boom Length 7450mm(24′5″) 8700mm(28′7″) 8090mm(26′6″)
Articulation 92° 92° 92°
The 2nd boom Length 6610mm(21′8″) 7860mm(25′9″) 6820mm(22′4″)
Articulation 180° 180° 180°
The 3rd boom Length 6730mm(22′1″) 7980mm(26′2″) 6825mm(22′5″)
Articulation 180° 180° 180°
The 4th boom Length 6830mm(22′5″) 8080mm(26′6″) 8440mm(27′8″)
Articulation 240° 240° 270°
The 5th boom Length - - 8715mm(28′7″)
Articulation - - 240°
Other supplier products
|
|
BH8500CXE generator |
Describe of the products:
“BH” series Air-cooling generator set is following:
New type voltage the AVR could ensure the voltage outp... |
|
|
60M Concrete Pump Trucks:SY5502THB 60V |
60M Concrete Pump Trucks:SY5502THB 60V
Main Features:
1. 5-section RZ-shaped boom, with wide placing range and no dead angle;
2. X-shaped outrig... |
|
|
BHC20A Crawler Crane |
1. Original Imported power system, hydraulic system and pilot control system ensure stable performance and sensitive operation.
2. Unique telesco... |
|
|
Digital generator |
Features and benefits:
1、Low noise design, about 54~59dB/7m.
2、Lightweight delivers super portability.
3、6 hours running on a single fuel tank.... |
|
|
CR-20GFQ generator |
CR-20GFQ unit Technical parameters:
Main features of gas engine
Engine Model CR4100Q
Engine cylinder diameter×stroke 100×115 mm
Eng... |
All supplier products
Same products
