.

Micro Diaphragm Solenoid Valves

A solenoid operated diaphragm valveis one of the crucial control units of any fluid control system to control the media of liquid or gas.

When the power is on or off, the media (liquid or gas) can pass through the valve or not, to achieve the purpose of shutting off or allowing fluid flow.

The composition of diaphragm operated solenoid valveare several parts, the most important are the diaphragm, spring, armature and coil.

Keyto's diaphragm type solenoid valvehave dozens of different configurations to meet your requirements!

Different Micro Diaphragm Solenoid ValveFor Sale

Rocker solenoid diaphragm valve1013

Rocker-type structure, no dead volume, small size, takes up extremely little installation space.

Rocker Diaphragm Solenoid Valve 1033

Rocker type structure,small dead volume, high pressure resistance.

Rocker solenoid valve diaphragm kit1043

Rocker type structure, small dead volume, high-pressure resistance, large volume.

Assembled Type Solenoid Valve 1021

High-pressure resistance, -70kapa~0.3mpa, isolation diaphragm sealing, resistance to impurities, crystal, dust.

Direct Acting diaphragm for solenoid valve1022/1032/1042

Large diameter large flow rate, direct-acting structure, diversification of choice for connection method with tube and connectors.

Advantages of KeytoMicro Diaphragm Solenoid Valve

Small size

The overall dimension of the 1013 series solenoid valve is small, takes up extremely small installation space.

Original Brand, Original Designs, Patent Owner

Patent No: CN114060565A.

Long lifetime

5 +million cycles under normal working conditions.

Low power consumption

1013 rocker type solenoid valve---1.8w, 1013 direct-acting type solenoid valve---2.8w; The special design can effectively reduce the heating under long-lasting operating conditions.

Fast response time

The port-to-port switching time of the solenoid valve in operation is <20ms.

Small volume change

The special internal construction of 1013 rocker type solenoid valves, the variation of action volume is basically 0.

Differences Between Micro Diaphragm Solenoid Valveand Miniature Proportional Valve

Miniature Proportional Valve

A proportional valve is a new type of hydraulic control device. On the ordinary pressure valve, flow valve, and directional valve, the proportional electromagnet is used to replace the original control part to continuously and proportionally control the pressure, flow, or direction of the oil flow according to the input electrical signal. Proportional valves generally have pressure compensation performance, and the output pressure and flow can not be affected by load changes.

The proportional valve performs continuous step control according to the proportion and automatically compensates and controls the target according to the information collected according to the actual situation. The valve opening direction, opening amount, or spring setting force are all follow-ups, realizing a series of continuous and controllable follow-up actions.

Micro Diaphragm Solenoid Valve

The ordinary solenoid valve is a single action on-off valve, which can't perform continuous step control in proportion. Its valve opening direction, opening amount, or spring setting force are all fixed and cannot be changed according to the actual situation.

FAQs of Micro Diaphragm Solenoid Valve

What is the use of micro diaphragm solenoid valve?

Solenoid valve function: it is a cut-off valve that automatically opens and closes by electromagnetic force. It is mainly used as an automatic basic device for controlling objects and belongs to the actuator. Usage: it can be used in an industrial control system to regulate medium direction, flow, speed, and other parameters, so it is widely used in various production fields. Most of Keyto's solenoid valves are used in IVD or medical terminals.

How does a micro diaphragm solenoid valve work?

When the solenoid valve is in the closed state, under the action of the spring force and the gravity of the valve core, the sealing surface of the valve core sealing block is in close contact with the annular plane of the valve seat. Since the annular plane of the valve seat is tiny, the sealing surface of the valve core forms a small annular sealing belt, which plays a good sealing role. When the coil of the small solenoid valve is energized, the valve core moves upward against the pressure of the spring force and the self-weight under the electromagnetic energy. At this time, the sealing surface of the valve core is separated from the valve seat, the pipeline is connected, and the medium flows out through the valve core hole; When the coil is powered off, the attractive electromagnetic force of the coil disappears, and the valve core moves downward under the action of the spring force to close the air circuit.

Does the micro diaphragm solenoid valve require pressure?

The micro diaphragm valve needs to be energized through the circular motion of the motor and the mechanical device to form pressure so that the diaphragm inside the pump makes the reciprocal motion and the air in the pump cavity compress and stretches. Under the check valve, a positive pressure is formed at the drainage port; a vacuum is created at the pumping port, thus forming a pressure difference with the outside atmosphere. Under this pressure difference, water is pressed into the water inlet and discharged from the drainage port. Under the action of kinetic energy transmitted by the motor, water is continuously drawn in and discharged, forming a relatively stable water flow.

For more information about diaphragm solenoid valve operationand diaphragm solenoid valve price, please feel free to contact us!



Send product request

To: SHENZHEN KEYTO FLUID CONTROL CO., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Keyto Microfludic & Consumables
Keyto Microfludic & Consumables To fight the COVID-19 outbreak, lots of global diagnostics companies bring high-capacity PCR test machine which requires huge consumables including...
Miniature Diaphragm Air Pumps
Miniature Diaphragm Air Pumps The working principle of the micro diaphragm air pumpis that the motor drives the elastic diaphragm to reciprocate through the eccentric wheel so t...
Rotary Shear Valves
Rotary Shear Valves Keytomulti-channel rotary shear valve can be categorized into long lifetime model and regular model according to the service life. For long lifetim...
Customized Machining
Customized Machining Super precision components are Key to Keyto's cutting-edge product lines. A 3mm Diameter 316 Stainless Steel filler shown below is demonstrating...
Air Displacement Pipettes
Air Displacement Pipettes Affordable Liquid Handling Platform Air Displacement Pipette is a pipetting module developed by Keyto based on pneumatic aspiration and dispense...
All supplier products

Same products

CHINA CENTRIFUGAL SAND PUMPS
CHINA CENTRIFUGAL SAND PUMPS Seller: All Pumps Machinery Company Limited JDSB Series China Centrifugal Sand Pumpcontains almost all the features of JSB series pump. It ha...
Centrifugal Pump For Sale
Centrifugal Pump For Sale Seller: All Pumps Machinery Company Limited All Pumps Machinery, centrifugal pumps company from China, offer a wide range of efficient horizo...
CENTRIFUGAL PUMP FOR CRUDE OIL TRANSFER
CENTRIFUGAL PUMP FOR CRUDE OIL TRANSFER Seller: All Pumps Machinery Company Limited CENTRIFUGAL PUMP FOR CRUDE OIL TRANSFER All Pumps Machinery provides BP and GC Series Belt Pul...
BACK PULL OUT VERTICAL END SUCTION CENTRIFUGAL PUMP
BACK PULL OUT VERTICAL END SUCTION CENTRIFUGAL PUMP Seller: All Pumps Machinery Company Limited Aix Series end suction pump is one of the simplest types of centrifugal pump, with motor slide an...
API610 CHEMICAL PUMPS
API610 CHEMICAL PUMPS Seller: All Pumps Machinery Company Limited All Pumps Machinery Supplied the LGTH series API610 chemical process pump is a single-stage singl...