.

Hearth roll

Our company website:

Hearth roll is one of the most important parts of the continuous annealing furnace. Its working condition is the decisive factor if annealing furnace can be normal production.

Work and structural features of a hearth roll

Structures and materials of hearth roll

Working at over 800 ℃ in the furnace and rotation under load, meantime mechanical damage by charge, the hearth roll material must have high-temperature strength and oxidation resistance. The structure shown that the centrifugal casting roll is a hollow cylinder, two alloy roll end welded. Furthermore two end shaft welded in the roll end. The thin-walled rollers to give axial thermal resistance. The insulation materials inserted from the roll barrel to roll the end to reduce the temperature of the bearings.

Furnace hearth roll materials are ZG35Ni20Si or ZGCr25Ni35Nb, due to the high Ni alloy is expensive, domestic production of furnace hearth rollers using cheap ZG3Cr24Ni7SiNRe, this material has high-temperature strength, endurance strength higher than ZGCr25Ni20Si2, after long-term use aging embrittlement tendency is small. Due to the addition of rare earth the oxidation resistance of the steel improved.

The hearth roll body

The diameter of the furnace hearth roll if possible use of smaller size at high-temperature strength permitting to reduce the weight of the weight and save precious metal.

The furnace hearth roll commonly use spiral roller bearings or spherical bearings. The bearing temperature is high so high-temperature grease lubrication is needed. The diameter of the haft journal is usually smaller than the 0.1-0.25mm of bearing because of radial expansion.

The roller can be applied in not only metallurgy industry but other appliance.

Application:

The various rolls/rollers are of good heat, corrosion, wear resistant properties, working at high temperature environment on average: 800 to 1, 200° C, which are used in the steel mills, like continuous annealing line, continuous galvanizing line.

Process:

Centrifugal casting for barrel/tube, forging for journal/shaft, static /investment or sand casting for cone/trunions, welding and machining and grinding.

Material:

High nickel and high chrome heat resistant alloys, cobalt base alloys, like HU, HT, HK, HP, HW, 24/24NbTiZr, 50Cr/50Ni (2.4813), 1.4865, 1.4849, 1.4848, 1.4410, 1.4059, 1.4841, 1.4845, 1.4852, 2.4879 or as per customer's requirements.

The roller can be forged in perfect quality and also manufactured by centrifugal cast. The ceramic molds centrifugal castings offer many advantages as to flexibility of diameter and length. The production is dense, sound castings and has almost the same mechanical properties as forging production. The production can be machined to different roller, hydraulic cylinder, pipe model, etc. Our production has grand application area in industry and has international standards of quality that help us assuring our customers of our credibility.



Send product request

To: Nanjing Xinshuo Mechanical Equipment Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Duplex stainless steel
Duplex stainless steel Our company website: Duplex stainless steel (DSS for short) refers to stainless steel with ferrite and austenite accounting for about 50% resp...
Wear Resistant and Corrosion Resistant Casting Alloy Tube
Wear Resistant and Corrosion Resistant Casting Alloy Tube Our company website: Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, f...
Sink Roll
Sink Roll Our company website: The roller can be applied in not only metallurgy industry but other appliance. 1. Furnace roller 2. Hearth roll 3. Sink rol...
CA6NM ASTM A743 A743M
CA6NM ASTM A743 A743M Our company website: CA6NM ASTM A743 A743M CA6NM A743 A743M A487 Grade(UNS):CA6NM (J91540) Type:12 Chromium,4 Nickel CA6NM Chemical Requirements:...
Rubber plastic roller
Rubber plastic roller Our company website: Plastic roller is mainly used for crushing, calendering, shaping and other processing of plastic. The outer layer of rubber ...
All supplier products

Same products

Folding Roller Scooter With Knee Support Instead Of Crutches
Folding Roller Scooter With Knee Support Instead Of Crutches Seller: Yongkang Beiqin Industry & Trade Co.,Ltd Folding Roller Scooter With Knee Support Instead Of Crutches advantage: With PU knee pads, ...
Diamond Dressing Roller
Diamond Dressing Roller Seller: Henan E-Grind Abrasives Co., Ltd. Rotary dresser grinding wheelwith Silicon Carbide, Aluminum Oxide, Diamond, or CBN as grinding me...
roll
roll Seller: Hangzhou Roll Forming Technology Co.,Ltd Fully automatic, our high speed rollformer is designed with a Cassette-type platform and a quick-...
High Speed Metal Deck Roll Former
High Speed Metal Deck Roll Former Seller: Hangzhou Roll Forming Technology Co.,Ltd Fully automatic, our high speed rollformer is designed with a Cassette-type platform and a quick-...
High Speed Double Deck Roll Forming Machine
High Speed Double Deck Roll Forming Machine Seller: Hangzhou Roll Forming Technology Co.,Ltd Having 2 layers of guiding tables and the advanced roll forming and cutting to length systems, th...