CWW-TB150 Window Wall (Thermal Insulation)

System

Window Wall(Thermal Break)

Model No.

CWW-TB150

Material

Aluminum Alloy/Glass/Aluminum Sheet/Aluminum Composite Panel/Galvanized Sheet

Hardware

Chinese top brand(Kin Long)/Germany brand

Glass Type

Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak

Cooperated Glass Brand

Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass

Surface Treatment

Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain

Profile Brand

6063-T5/6063-T6/6061-T5/6061-T6

Themral Profile

Non-Thermal Break/Thermal Break

Standards

In Complianca With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO

Application

Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization

System Customziation

Available

Design Wind Pressure

Wsls=+1.61KPA/-2.09KAP, Wuls=+2.49KPA/-3.23KPA

Test

Pressure

Results

Preloading(Clause 8.2.2 of AS/NZS4284:2008）

+1.61kpa

No separation, plastic deformations or deleterious was observed.

-2.09kpa

Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008)

+482kPa

There were no leaks.

Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008)

(Pa)

There were no leaks.

(Pa)

(Pa)

Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284:2008)

+1.61kpa

During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits.

-2.09kpa

Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008)

+/-165Pa

The rate of air leakage of the specimen was within the allowable values.

Water Penetration Test under Static Water Penetration Test under Static 4284:2008)

+482Pa

There were no leaks.

Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008)

(Pa)

There were no leaks.

(Pa)

(Pa)

Structural ProofTest at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284:2008)

+2.49kpa

No collapse of the test specimen was observed under the specified pressure.

-3.23kpa

Seal Degradation Test(Clause 8.10 of AS/NZS 4284:2008)

(Pa)

No water leakage was observed.

(Pa)

(Pa)

NFRC Procedures

NFRC100SB, NFRC200-2010 and NFRC500-2010

Software Tools

THERM 7.4.3.0 and WINDOW 7.4.6.0

Configuration

6mm HS (CAVS S1)#2 +12Ar +6-T-HST

Panel Dimension

2640mm Wide 6890mm High

Frame

Painted Aluminum

Panel U-value

Visible Light Transmission

SHGC

Parts Location

Frame Area/m2

Edge Area/m2

U-Value(Frame)W/m2k

U-Value(Edge)W/m2k

Header

Left Jamb

Right Jamb

Sill

Glass Data: mm HS (CAVS S1)#2 +12Ar +6-T-HST

Visible Light

SHGC

SC

NFRC U-valueW/m3k(Argon)

STC

T%

R-out%

R-in%

Winter

Summer

72

12

12

36