PE polyethylene release film /release liner with silicone coated
PE release film
Products overviews: PE release film refers to the film with separative film on the surface.
PE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, then do plasma treatment to the film or coated with fluorine, to make it act out the light and stable release force to different organic pressure glue. According to different release film , the release force is different, the viscidity of release product glue is different , to adjust the release force, to make it have the light and stable release force during peeling.
It is mainly used for: self-adhesive waterproofing coil materials, waterproofing materials, hot melt materials, hygiene products, advertising supplies,etc.
Performance: the temperature resistance 130 ~ 200 ℃, the elongation at rupture rate ≥ 60% peeling≥ 7.2 N/m, adhesive rate ≥95%.
Material color: dark gray, black, white, double black and milky white.
Our company can produce products of different colors per customer's specific requirements.
Material thickness: 0.027 mm, 0.03 mm to 0.06 mm, produce products of different thickness according to customer's specific requirements
Material width: 8 cm ~ 2.5 m, produce products of different width according to customer's requirements.
Send product request
Other supplier products
POF heat shrink film/package film | Its main advantage is excellent hot slip property.When the film without hot slip property,the hot surface after shrink causes stick,which makes you... | |
reinforced metal aluminum foil used as surface material | Reinforcing metal aluminum foil Reinforcing metal aluminum foil is the metal aluminum foil covered with PET film. The metal aluminum foil is easy t... | |
PET Isolating membrane used for self adhesive waterpfoof membrane | PET Isolating membrane used for self adhesive waterpfoof membrane PET release film PET characteristic 1.PET release film with a flat bright surface... | |
PE heat shrink film/package film | Heat shrink film Technical parameters: Width: single 0.2m~9m Tear strength: horizontal ≥40kn/m Vertical ≥40kn/m Thickness: 0.015mm~0.35mm Te... | |
PE release liner for self adhesive waterproof membrane | PE release liner for self adhesive waterproof membrane PE release film Products overviews: PE release film refers to the film with separative film... |
Same products
PLA Sheet & Film | Seller: CHANGZHOU EASY JOINT IMPORT&EXPORT CO.,LTD. | PLA Sheet & Film Description The mechanical properties of PLA sheets are very similar to PET... | |
HS/LT-006 Heat Transfer PET Film for Litho Offset Printing | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-006 polyester transfer filmis specially coated for litho transfer printing. It is very sm... | |
HS/CP-007 Silicone Pet Transfer Films | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-007Silicone Ink Heat TransferFilms HS/CP-007 is a heat transfer PET filmfor silicone inks ... | |
HS/CP-003 Two Side Matt Pet Transfer Films for Screenprint | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-003 is a matte finished polyester release filmcoated for screen printing. Two side-release ... | |
HS/CP-002 High Density Heat Transfer Pet Films for 3D Logo Labels | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | This type of pet film heat transferis suitable for water-based, plastisol based and solvent-based... |