Polypropylene Metallised Film
Metallized polypropylene filmfor electrical appliances can be coated with a very thin plastic film on its surface.
It will melt under high vacuum melting and the evaporation of the upper. It is the main raw material for thin film batteries.
Features of Metallised PolypropyleneFilm
Base Film
Biaxially Oriented Polypropylene film (BOPP film).
Melt, Evaporate And Precipitate Material
Melt, evaporate and precipitate high-purity aluminum or zinc on BOPP base film under a high vacuum, and form a very thin metal layer on the surface of BOPP base film.
Self-healing Effect
It has a self-healing effect. After the local breakdown of metallized film medium, it instinctively recovers to the electrical performance phenomenon before breakdown.
Margin
Margin refers to the requirement of actual capacitor production. The blank insulating strip (strip) formed by covering the edges or middle of one or both sides of the metallized film without metal evaporation is called the margin, and its width is called the margin.
The Square Resistance
The resistance value of the metal layer on the mpp filmof square resistance in the unit square area is called the square resistance, which is expressed in Ω/□. Generally, the square resistance is used to represent the thickness of the metal coating.
Thickness and Width
Thickness: 2um - 12um
Width: according to the customer's design needs, the steam plating and slitting shall be carried out.
Storage of Metallised Polypropylene Film
Prior to use, the metallic film should be kept in its original packaging at a temperature between 5 and 35 °C and a relative humidity of no more than 85%.
When exposed to moisture, metalized layers are readily oxidized.
As a result, once opened, the film should be utilized as soon as feasible.
After opening, a temperature between 15 and 25 °C with a relative humidity of under 60 % is advised.
The storage time can be as follows when the original sealed container is kept as described above:
Aluminized film: 12 months after the date of delivery.
Metalized Al/Zn alloy film:
The storage time (as measured from the delivery date) depends on the film's resistivity because zinc is rather unstable:
≦10Ω: 6 months
10-30Ω: 3 months
>30Ω: 1 month
What is Metallised Polypropylene Film Used for?
Metallised polypropylene film is used in film capacitors, such as MKP/MFP (CBB) capacitors, EMI suppression capacitors, AC motor capacitors, Power electronic capacitors (DC-Link capacitors, DC filter capacitors, AC filter capacitors), DC pulse capacitors, DC high voltage Storage capacitors, Self-healing shunt power capacitors (Power factor correction capacitors), etc.
If you are looking for a reliable capacitor factory, don't hesitate to contact us!
For more about capacitor price, contact us.
Send product request
Other supplier products
 |
CBB16 Welding Inverter DC Filter Capacitor | CBB16Welding Inverter DC Filter Capacitor CBB16 Welding Inverter DC Filter Capacitor's Application： Cn Un Imax dv/dt... |
 |
CBB61 Fan Capacitor with 2 Pins | c8861 capacitor cbb61f 450v cbb61 s3 sh cb661 capacitor fan motor capacitor cbb61 CBB61a capacitoris a machine suitable for the starting and... |
 |
CBB61 Fan Capacitor with 2 Pins | Fan motor capacitor CBB61is a machine suitable for the starting and running of single-phase motors with a frequency of 50HZ AC power supply, and ca... |
 |
For Water Pump and Wash Machine Manufactures (CBB60 Capacitor ) | CBB60 washing machine capacitorFeatures: Widely applied to the starting and running of AC single-phase motors at 50Hz/60Hz frequency power Se... |
 |
Motor Run Manufactures (CBB65 Capacitor) | CBB65 motor run capacitors for saleFeatures: Widely applied to the starting and running of AC single-phase motors at 50Hz/60Hz frequency power. ... |
Same products
 |
Protective Film For Car Hood Surface | Seller: Guangdong NB Technology Co,.Ltd | Protective Film For Car Hood Surface product description As it is known to us that the surfaces... |
 |
PLA Sheet & Film | Seller: CHANGZHOU EASY JOINT IMPORT&EXPORT CO.,LTD. | PLA Sheet & Film Description The mechanical properties of PLA sheets are very similar to PET... |
 |
HS/LT-006 Heat Transfer PET Film for Litho Offset Printing | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-006 polyester transfer filmis specially coated for litho transfer printing. It is very sm... |
 |
HS/CP-007 Silicone Pet Transfer Films | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-007Silicone Ink Heat TransferFilms HS/CP-007 is a heat transfer PET filmfor silicone inks ... |
 |
HS/CP-003 Two Side Matt Pet Transfer Films for Screenprint | Seller: JIANGYIN QIANTAI NEW MATERIAL TECHNOLOGY CO.,LTD. | HS/CP-003 is a matte finished polyester release filmcoated for screen printing. Two side-release ... |
