AC EV Charging Socket TYPE2
Connection Mode of Type 2 charging socket
Riveting Pressure mode
Screw mode
Mechanical Properties of Type 2 charging socket
Mechanical life: no-load plug>10000
Insertion force:<100N
Electrical Performance of Type 2 charging socket
The rated current: 16A,32A
The rated voltage: 250V,440V
Insulation resistance: >1000MΩ(DC500V)
Pins temperature rise:<50K
Withstand voltage: 2000V
Contact impedance: 0.5mΩMax
Applied Materials of Type 2 charging socket
Shell material: thermoplastics, flame retardant grade UL94V-0
Contact-tube: Copper alloy, silver plating
Seal:Rubber, Silicone
Environmental Performance of Type 2 charging socket
Operating temperature: -30℃~+50℃
Waterproof rate: IP55
Type 2 charging socketFeatures
Mode 2 charger conforms to the provisions and requirements of IEC62196-2 2016.
Type 2 socket 32a and 16a match with Hela locking device.
Have one or two PTC (PT1000) thermistor (can match with NTC or Temperature control switch).
Our ev socket with beautiful appearance and prevention cap, which can be installed on the left side, the right side or the front of it.
Reliable material, flame retardant, pressure proof, wear-resisting, vimpact resistance, high oil proof.
Excellent protection performance, protection grade achieved IP55 (working condition) .
Type 2 EV Charging SocketApplies to Vehicle
This type 2 ev charging socket has wide applications. For Tesla model3, for Tesla Model S, for Tesla Model X, for BAIC EU-Series, for BYD Yuan/S2 EV, for BYD e5, for Chevrolet Volt, for Mia, for Mia Electric Van, for Mitsubishi OUTLANDER PHEV, for Nissan NV200 SE Van, for Nissan leaf, for SAIC Baojun E-Series, for SAIC Roewe Ei5 EV, for BMW 530e/Le, for Renault Zoe, for Hyundai Kona EV, for BMW i3, for BYD Tang PHEV, for Chery eQ EV, for Toyota Prius PHEV, for Volkswagen e-Golf, for Geely Emgrand EV, for Great Wall Ora R1 EV.
As one of the most reliable ev charger companies, we providetype 2 socket 32a, type 2 plug ev, ev plug type 2, type 2 connector ev, type 2 socket ev, Type2 EV Charging Socketand etc. Contact us to know more about ev plug types.
Send product request
Other supplier products
 |
IEC Dummy Socket | Sturdy and Durable Lot ways to install it. Could be fixed on the wall or any mounted plate. Advantage Easy to install, and flexible assembly ... |
 |
TYPE2-TYPE1 Adaptor Charging Mode3 | Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2T vehicle run over pressu... |
 |
IEC Dummy Socket | Sturdy and Durable Lot ways to install it. Could be fixed on the wall or any mounted plate. Advantage Easy to install, and flexible assembly Be ... |
 |
TYPE2 AC EV Charging Socket | AG ELECTRICAL is one of the top electric vehicle charging equipment manufacturers, our GBT EV Charging productsare sold to many countries all over ... |
 |
TYPE2-TYPE1 Adaptor Charging Mode3 | Mechanical properties Mechanical life: no-load plug>10000times Impact of external force: can afford 1m drop and 2t vehicle run over pressure. ... |
Same products
 |
Lead Acid Replacement Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Lead Acid Replacement Battery Lead Acid Replacement Battery A is a battery designed to re... |
 |
Stackable Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Stackable Battery Stackable Battery A is a modular energy storage solution that can be st... |
 |
Rack Mounted Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Rack Mounted Battery Rack Mounted Battery A is a type of energy storage solution designed... |
 |
Wall Mounted Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Wall Mounted Battery A is a storage solution that can be affixed to a wall, designed to hold... |
 |
15kwh Lithium Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | 15kwh Lithium Battery CH-48300FS-TS The 51.2V 460Ah floor standing lithium battery is a sma... |
