GB/T EV AC Charging Socket
Mechanical Life
Mechanical life: no-load plug>10000times
Insertion force:<100N
Applied Material
Shell material: thermoplastics, flame retardant grade UL94-0
Contact - tube: copper alloy, silver plated
Environmental Performance
Operating temperature: -30℃~+50℃
Electrical Performance
The rated current: 10A, 16A, 32A, 63A
The rated voltage: 250V/440V
Insulation resistance: > 1000MΩ(DC500V)
Pins temperature rise:<50K
Withstand voltage: 2500V
Contact impedance: 0.5mΩMax
Features of GB/T EV AC Charging Socket
Conform to the provisions and requirements of <Connection set for conductive charging of electric vehicles> GB/ T 20234.2-2015.
Have a electromagnetic locking device (can match with hela lock), have functions of signal feedback.
Have one or two PTC (PT1000) thermistor (can match with hela lock), have functions of signal feedback.
Beautiful appearance, prevention cap can be installed on the left side, the right side or the front of it.
Reliable material, flame retardant, presssure proof, wear-resisting, impact resistance, high oil proof .
Excellent protection performance, prodection grade achieved IP55 (working condition).
Product Specification and Cable Standard
|
Product Type |
Rated Curent/ Voltage |
Cable Specifications |
Note |
|
AG-GBAC-Z10S |
10A/250V |
HO7BZ5-F3X2.5mm2+2x0.75mm2 |
The wire length a end of treatment are according to the customer requirement. |
|
AG-GBAC-Z16S |
16A/250V |
H07BZ5-F3X2.5mm2+2x0.75mm2 |
|
|
AG-GBAC-Z16S-3 |
16A/440V |
H07BZ5-F5X2.5mm2+2x0.75mm2 |
|
|
AG-GBAC-Z32S |
32A/250V |
HO7BZ5-F3X6mm2+2x0.75mm2 |
|
|
AG-GBAC-Z32S-3 |
32A/440V |
H07BZ5-F5X6mm2+2x0.75mm2 |
|
|
AG-GBAC-Z63S-3 |
63A/440V |
H07BZ5-F5X16mm2+2x0.75mm2 |
As one of the most reliable ev charge point manufacturers, we provide electric vehicle charging solutions, ev car charger adapter, ev charging adaptorsand etc. Contact us to know more.
Send product request
Other supplier products
 |
SAE EV Charging Socket | Mechanical Properties Contact Pin: Copper alloy, silver or nickel plating Sealing gasket: rubber or silicon rubber Mechanical life: no-load plug... |
 |
TYPE2-TYPE2 Charging Mode3 | Conform to the provisions and requirements of IEC 62196-2 IEC 2010 SHEET 2-lle. Product assembly conforms to IEC charging mode 3 connection mode... |
 |
SAE J1772 EV Charging | "American Standard" refers to the ev j1772standard. SAE j1772 evis just a general term. It includes four subdivision standards and three different ... |
 |
TYPE2 AC EV Charging Socket | Mechanical Properties Mechanical life: no-load plug>10000 Insertion force:<100N Electrical Performance The rated current: 16A,32A,40A The... |
 |
SAE AC Dummy Socket | Feature Sturdy and Durable. Lot ways to install it. Could be fixed on the wall or any mounted plate. Advantage Easy to install, and flexible... |
Same products
 |
Lead Acid Replacement Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Lead Acid Replacement Battery Lead Acid Replacement Battery A is a battery designed to re... |
 |
Stackable Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Stackable Battery Stackable Battery A is a modular energy storage solution that can be st... |
 |
Rack Mounted Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Rack Mounted Battery Rack Mounted Battery A is a type of energy storage solution designed... |
 |
Wall Mounted Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | Wall Mounted Battery A is a storage solution that can be affixed to a wall, designed to hold... |
 |
15kwh Lithium Battery | Seller: Shenzhen CH Advance Tech Co., Ltd | 15kwh Lithium Battery CH-48300FS-TS The 51.2V 460Ah floor standing lithium battery is a sma... |
