.

3 Ton Cable Drum Pulling Hoist Winch


The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.


Send product request

To: Bazhou Lineng Hardware Tools CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

L06S15 Cobra Duct Rodder
L06S15 Cobra Duct Rodder 1. It is easy to lead, can be used in narrow passage and limited space 2. A lot of the handle, the user can better control to use 3. Self expansion...
Quality Steel Material Cable Pulling Socks
Quality Steel Material Cable Pulling Socks Cable Socks / cable pulling grip mainly used for all kinds of wire and cable (overhead conductors, insulated cables, etc.) of tractor pay-off const...
BZ-85 electric battery power Cable Cutter
BZ-85 electric battery power Cable Cutter Battery punch driver:BZ-85 Punching range:Dia 85mm(Cu/ Al cableand armoured cable) Punching force:60KN 1.All tools can be controlled by one key-pre...
 EZ-1632 charging crimping pliers of German type
EZ-1632 charging crimping pliers of German type parameter specification: Product model: EZ - 400 plug-in crimping pliers Output: 120 kn Scope: pressure was 16-400 Stroke: 38 mm Pressure welding n...
hand manual hydraulic cable cutter,electric hydraulic cutter
hand manual hydraulic cable cutter,electric hydraulic cutter Specifications hydraulic cable cutter Cutting range:DIA.45mm Cu/Alu cable and Amoured Cu/Alu cable Flip top cutting head rotates 350°. Two stag...
All supplier products

Same products

Lt200A Roots Blower Positive Pressure Suitable for Industrial Heavy-Duty Applications
Lt200A Roots Blower Positive Pressure Suitable for Industrial Heavy-Duty Applications Seller: Greentech International (Zhangqiu) Co., Ltd Greentech International (Zhangqiu) Co., Ltd. is a leading manufacturer of blowers and vacuum pump...
Greentech Lt-065 380V Low-Noise Three-Lobe Roots Blower
Greentech Lt-065 380V Low-Noise Three-Lobe Roots Blower Seller: Greentech International (Zhangqiu) Co., Ltd Three lobes blowers are new series roots type blowers. By cnc machinewe made precise rotors to pr...
2rb743-1hy99 Bare Shaft Side Channel Blower/Centrifugal Blower
2rb743-1hy99 Bare Shaft Side Channel Blower/Centrifugal Blower Seller: Greentech International (Zhangqiu) Co., Ltd Motorless / bare shaft side channel blower (ring blower, compressor, vacuum pump)Greentech Intern...
2rb423-1hy99 Bare Shaft Side Channel Blower/Ring Blower
2rb423-1hy99 Bare Shaft Side Channel Blower/Ring Blower Seller: Greentech International (Zhangqiu) Co., Ltd Motorless / bare shaft side channel blower (ring blower, compressor, vacuum pump)Greentech Intern...
2rb723-1hy99 Bare Shaft Side Channel Blower/Air Blower
2rb723-1hy99 Bare Shaft Side Channel Blower/Air Blower Seller: Greentech Industry (Jinan) Co., Ltd Motorless / bare shaft side channel blower (ring blower, compressor, vacuum pump)Greentech Intern...