factory direct sales duct rodder
Technical Date of Fiberglass Duct Rodder Specification
Rod Diameter (mm) Φ 4.5-Φ 16
Rod Length (m) 30m~500m
Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000,680x240x700, 420x180x400,etc.
Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin at high temperature
Fiber glass rod outer, High Density polyethylene coating
Metal Frame: Steel with high-temperature sprayed plastic or hot dip galvanized
Physical Property
Fiber glass content:75-80%
Density > 1.9gr/cm3
Working environment-40° C to +80° C
Minimum Pulling strength 4000N +/-5%
Consistency of rod 137gr/m
Flexural Modulus > 46.500Mpa
Elongation at break 2.5-3%
Min Bending Radius 388mm
Other supplier products
|
|
EZ-85 electric battery powered Cable Cutter |
1.All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stopforcing pressure, loosing fully mea... |
|
|
SNAKE CABLE DUCT PULLER NBN |
Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every Metre Marking for Easy use. 3. Yellow Color for better Vis... |
|
|
Straight line cable roller |
The cable roller can protect the cable, at the same time, cable block also can effectively reduce the friction of the cable, improve the constructi... |
|
|
cable puller/Cable bollard winch |
Cable winch is an essential part of the erection of the underground cable lines, vertical bars and other construction products, can be in a variety... |
|
|
SMG -300 mechanical cable crimping pliers |
Manual type crimping pliers：Using high and low two levels of plunger pump driven design, operation fast and effort; System is equipped with safety ... |
All supplier products
Same products
