model 3t, 5t, 8t cable winch
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.
Other supplier products
|
hydraulic adjustable cable stand |
Use: support ladder type structure suitable for cable tray, you can use a variety of specifications of wire coil Trapezoidal wire laying frame, c... |
|
Powerful eco duct rodder |
High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating.Duct Rodders ... |
|
pulling hoist |
1. small size & compact structure. The machine is now supported by gasoline engine, diesel engine, electric or imported gasoline engine. 2. lig... |
|
SD-1000C Multi function wire grip |
ModelNo.
Rated Load(KN)
Range of application(mm)
Weight(KG)
SD-1000C
10
Power transmission and distribution of 2.6-15steel strand... |
|
preformed dead end grip for cables |
Open weave hoisting grips provide an effective means for hoisting coax and elliptical waveguide into position and can be utilized to provide additi... |
All supplier products
Same products