.

EZ-85 battery powered armoured Cable Cutter

1.All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stopforcing pressure, loosing fully means piston return to the original position.
2.LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by the Display, also we can special making for customer to show the pressure if necessary.
3.Air Cooling Heat dissipation systemto extend using.
4.Heads Rotates 350 degreein order to gain better access to tight corners or other difficult working areas.
5. Li-ion batteriesdo neither have a memory effect nor self-discharge. Even after long periods of non operationthe tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity andshorter charging cycles copare to NiMH batteries.
6.The unit is equipped witha double piston pumpwhich is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion
7.USD connect to memory crimping time.



Send product request

To: Bazhou Lineng Hardware Tools CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Straight line cable block
Straight line cable block The cable roller can protect the cable, at the same time, cable block also can effectively reduce the friction of the cable, improve the constructi...
Heavy Duty Cable Roller manufacture
Heavy Duty Cable Roller manufacture 1.Application: Used for guiding cable to turn and set free. and used for setting power cable and communication cable in trenchers or on ground. 2....
 Stripper for high voltage cable
Stripper for high voltage cable 1.tungsten steel blade,hard and sharp. 2.Can cut the smooth degree of slope. 3.For cutting out the standard of thick wide angle,diameter of the cab...
Cable Hauling and Lifting Winches,Capstan Winch
Cable Hauling and Lifting Winches,Capstan Winch Powered Winches,Cable Winch,ENGINE WINCH,Cable Drum Winch,Cable pulling winch Application: It is used for tower erection, stringing in electric pow...
EZ-85 electric battery powered armoured cable cutting tool for max dia 85mm
EZ-85 electric battery powered armoured cable cutting tool for max dia 85mm Cutting force: 60KN Stroke: 86mm Cutting cycle: 70 times Cutting range: dia 85mm (Cu/Al cable and armoured cable) Voltage: 18v Capacity: 3.0Ah Char...
All supplier products

Same products

Extruder Open Screw Barrel
Extruder Open Screw Barrel Seller: NANJING LESUN SCREW CO.,LTD The extruder open screw barrelare used in the feeding section, the natural exhausting section an...
Backward Pumping Kneading Block
Backward Pumping Kneading Block Seller: NANJING LESUN SCREW CO.,LTD The backward pumping kneading blockplays a role of adjusting the fullness of the material and ex...
Extruder Side-Feed Barrels
Extruder Side-Feed Barrels Seller: NANJING LESUN SCREW CO.,LTD Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each ot...
Extruder Side-Feed Barrels
Extruder Side-Feed Barrels Seller: NANJING LESUN SCREW CO.,LTD Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each ot...
Extruder Spare Parts for Plastic pelletizing
Extruder Spare Parts for Plastic pelletizing Seller: NANJING LESUN SCREW CO.,LTD Extruder Spare Partsfor Plastic pelletizing Our components can operate in plastics industries, s...