.

EZ-85 electric battery powered Cable Cutter

1.All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stopforcing pressure, loosing fully means piston return to the original position.
2.LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by the Display, also we can special making for customer to show the pressure if necessary.
3.Air Cooling Heat dissipation systemto extend using.
4.Heads Rotates 350 degreein order to gain better access to tight corners or other difficult working areas.
5. Li-ion batteriesdo neither have a memory effect nor self-discharge. Even after long periods of non operationthe tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity andshorter charging cycles copare to NiMH batteries.
6.The unit is equipped witha double piston pumpwhich is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion
7.USD connect to memory crimping time.



Send product request

To: Bazhou Lineng Hardware Tools CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Supply hydraulic conductor crimping pliers of KDG-150A/200A
Supply hydraulic conductor crimping pliers of KDG-150A/200A Hydraulic crimping pliers:Monolithic crimping pliers, crimping pliers need to separate with the corresponding pump, general suitable for electric o...
engine winch,Cable Drum Winch,Powered Winch
engine winch,Cable Drum Winch,Powered Winch The use of ground grinding security technology (1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane...
 YQK-240 a new type of crimping pliers
YQK-240 a new type of crimping pliers 1 manual ratchet crimping pliers use and maintenance of the matters needing attention 2 don't charged line pressing, or in the vicinity of a charge...
Direct Manufacturer Glass fiber reinforced plastic cleaning rod
Direct Manufacturer Glass fiber reinforced plastic cleaning rod Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330...
Cable socks for coaxial cable
Cable socks for coaxial cable Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to han...
All supplier products

Same products

Extruder Open Screw Barrel
Extruder Open Screw Barrel Seller: NANJING LESUN SCREW CO.,LTD The extruder open screw barrelare used in the feeding section, the natural exhausting section an...
Backward Pumping Kneading Block
Backward Pumping Kneading Block Seller: NANJING LESUN SCREW CO.,LTD The backward pumping kneading blockplays a role of adjusting the fullness of the material and ex...
Extruder Side-Feed Barrels
Extruder Side-Feed Barrels Seller: NANJING LESUN SCREW CO.,LTD Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each ot...
Extruder Side-Feed Barrels
Extruder Side-Feed Barrels Seller: NANJING LESUN SCREW CO.,LTD Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each ot...
Extruder Spare Parts for Plastic pelletizing
Extruder Spare Parts for Plastic pelletizing Seller: NANJING LESUN SCREW CO.,LTD Extruder Spare Partsfor Plastic pelletizing Our components can operate in plastics industries, s...