SPD for Power Supply
Power surge protector, also known as the lightning protector, is suitable for AC 50/60HZ, rated voltage 220V/380V power supply system, to protect indirect lightning and direct lightning effects or other transient overvoltage surges, suitable for households The requirements for surge protection in residential, tertiary and industrial sectors include phase-to-phase, phase-to-earth, phase-to-neutral, neutral-to-earth, and combinations of protection modes. The power surge protector is usually connected in parallel to the circuit system. When lightning occurs, the high-intensity electromagnetic induction generated on the various metal pipes and wires entering the building will generate a large amount of pulse energy. The power surge protector will play a role to introduce the overcurrent to the earth and reduce the potential difference of each port of the device. It is suitable for transient overvoltage protection of 220/380V power supply and distribution systems. This product can effectively suppress induced overvoltage caused by lightning and system operation overvoltage, protect equipment safety, and ensure the normal operation of the system. Common surge protection devices: single or three-phase spd for power supply, generator surge arrester, and ups, PSU surge protector. If you want to know more information about specific spd such as the price, please feel free to contact us without hesitation.
Spd for power supplysystem in order to protect indirect lightning and direct lightning effects or other transient overvoltage surges
Types of Power Supply Protection Devices
AC Power SPDAC Power SPD
AC power SPD, are mainly applicable to the power distribution systems for Class I / II / III( Type1, type 2, type3) protection. Surge arresters for AC unit are designed to protect the power unit/line/circuit of electrical equipment from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance( ＜100μs) overvoltage.
DC Power SPDDC Power SPD
DC power SPD is designed for the protection of DC power systems from the damage of lightning over voltage, induce over voltage, transient operation, and resonance (Less than 100μs) over voltage.
Lightning Protection PDULightning Protection PDU
Power lightning protection strips are mainly used for the final protection of AC power, used for terminal equipment, such as background machines, video surveillance systems, Ethernet switches, and household appliances 220VAC power protection.
SCB ( Surge Protector Circuit Breaker )-SSD ( SPD Specific Disconnector)SCB ( Surge Protector Circuit Breaker )-SSD ( SPD Specific Disconnector)
In low voltage power systems, a surge backup protector (SCB) is an external disconnector used in series with a surge protector (SPD), suitable for AC 50/60hz, 230v-400v range of TT, TN, and other power supply systems, the product power frequency action current is less than 3A, (8/20s impulse current can pass through 120kA).
Power Supply Surge Protector Performance Characteristics
The discharge current is large, the residual pressure is extremely low, and the response time is fast
Adopt the latest arc extinguishing technology to completely avoid fire;
Adopt temperature control protection circuit, built-in thermal protection;
With power status indication, indicating the working status of the surge protector;
Rigorous structure, stable and reliable work
Surge Protection Device (SPD) for UPS and PSU Classification
According to the characteristics of the use of non-linear components, the surge protection equipment can be divided into:
Voltage switch type SPD
Commonly used non-linear components include discharge gaps, gas discharge tubes, etc., which have the characteristics of large current capacity (nominal current and maximum current) and are especially suitable for lightning overvoltage protection (ie L PZ0A area).
Voltage-limited SPD
Commonly used non-linear components include zinc oxide varistors, transient suppression diodes, etc., which are a large number of commonly used overvoltage protectors, which are generally suitable for indoor use (ie, L PZ0B, L PZ1, and L PZ2 zones).
Combined SPD
The combination of voltage switching elements and voltage limiting elements. With different impulse voltage characteristics applied, the SPD sometimes exhibits switching SPD characteristics, sometimes it exhibits voltage limiting SPD characteristics, and sometimes it exhibits both characteristics at the same time.
Different phase of domestic surge protection devices
Single phase surge protector is suitable for AC 50/60HZ, rated voltage 220V to 380V power supply system (or communication system) to protect indirect lightning and direct lightning or other instantaneous overvoltage surge protection. It is suitable for the requirements of surge protection in family housing, tertiary industry and industrial fields. It has relative protection modes such as relative phase, relative middle line, middle line to ground and its combination. The protection flow is large, the residual pressure is extremely low, and the response time is fast. The latest arc extinguishing technology is adopted to avoid fire completely.
Three phase surge protector: A three-phase power system is a multiphase system that uses at least three "hot" conductors to transmit three different independent AC currents. The fluctuation of single-phase power system will also cause great fluctuation of voltage. Due to the offset characteristics of the three-phase power signal, these changes are minimized, thus improving the efficiency of the system. Due to the load balance, the three-phase power supply reduces the vibration of the generator and motor, and minimizes or eliminates the neutral line. The three-phase power system can create and control the rotating magnetic field, which simplifies the motor design. When the manufacturer believes that there is a risk of load imbalance, a fourth neutral wire is usually added.
How does a surge protection system work?
The surge protector consists of five parts: discharge gap, inflatable discharge tube, varistor, suppression diode and choke coil, which includes at least one nonlinear voltage limiting element. The following is how each component works.
In order to improve the trigger probability of the discharge tube, there is a co-trigger in the discharge tube.
This kind of inflatable discharge tube has a two-pole type and three-pole type.
Techwin Inc. is a professional surge protector factoryin China,With matured experience in surge protectortechnology.
Send product request
Other supplier products
 |
2in 1 SPD for CCTV M10-24 D05J4 | 2 in 1 monitor lightning arrester(power and network), a Kind of SPD, designed for a digital camera to protect camera power, data line from lightnin... |
 |
SPD for Telecommunication/ Antenna protector | TV antenna feeder lightning arrester is a kind of antenna lightning protector, which is mainly used for coaxial cable lightning protection for feed... |
 |
2 In 1 SPD for CCTV M10-24 D12BM Signal SPD | 2 in 1 monitor lightning arrester(power and video), a Kind of SPD, designed for analog video/ digital camera to protect camera power, video line fr... |
 |
Signal SPD | Signal spd(SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually at the front end of ... |
 |
100KA DIN-rail Mounted Large Discharge Current AC Power SPD | M100 series power supply system AC modules are mainly applicable to the power distribution systems for class I / type 1 protection. Type 1 spd surg... |
Same products
 |
Weatherproof Fluorescent Light fittings MFS1002-B | Seller: MAM Explosion-proof Technology (Shanghai) Co.,Ltd | Waterproof Fluorescent LightingFixtures Waterproof fluorescent lighting fixtures own the functio... |
 |
Explosion-proof Flexible Conduit MFC | Seller: MAM Explosion-proof Technology (Shanghai) Co.,Ltd | This is an explosion-proof flexible conduit. Explosion-proof flexible conduit is flame-resistant,... |
 |
Explosion-proof WIFI Access Point (AP) MAMX-13/14 | Seller: MAM Explosion-proof Technology (Shanghai) Co.,Ltd | *Achieving full coverage of wireless network signals in industrial hazardous environments *Effic... |
 |
Unarmored Cable Gland MCGd-A(Single Seal) | Seller: MAM Explosion-proof Technology (Shanghai) Co.,Ltd | * Material: Nickel-plated brass, Stainless steel (SS304/SS316/SS316L), Carbon steel Q235 * Appli... |
 |
Waterproof Street Light MRL7025-A | Seller: MAM Explosion-proof Technology (Shanghai) Co.,Ltd | * Shell material: aluminum alloy * LED Brand: LUMILEDS * Power: 100 ~200W * Protection level: ... |
