MIL-DTL-83513 Micro D Connectors
Description:
By its very design, the Micro-D connector system meets all the requirements of robustness, durability, low contact resistance, high current, dielectric strength, shock, and vibration. With 1.27 mm (.050") contact spacing, Micro-D connectors, half the size of D-sub connectors, represent an excellent solution for saving both space and weight. In addition to a complete range of Micro-D connectors to MIL-DTL-83513, Sunkye' also offers Micro-D PCB connectors and cable assemblies in both metal and plastic bodied versions. With its many possible configurations, Micro-D technology is perfectly suited to a multitude of systems where weight, miniaturization or signal transmission integrity is paramount: applications benefiting from this technology include everything from missiles and their guidance systems, through oil well drilling tools to medical devices, satellites, and scientific research. For very specific applications such as medical MRI scanners or low magnetic field detection systems, Sunkye' has developed a range of non-magnetic connectors using new materials and surface treatments, avoiding ferromagnetic materials. Hermetic connectors are also offered for applications where an enclosure needs to be fully sealed from the outside world.
The Twist Pin contact by its design and performance enables the system to meet the most severe requirements – often significantly more so than stipulated in the MIL-DTL-83513 and MIL-DTL-32139 standards. The male Micro-D contact is made up of 10 strands of beryllium-copper and copper alloy twisted together, welded then bumped. These sprung strands are in fact compressed during insertion into the turned female contact and therefore a high number of electrical contact points are permanently assured while retaining flexibility and ease of insertion/ extraction. The bulged point will be compressed inside the socket during insertion. Insertion and retention performance of the twist pin and socket mated pair. Both socket contact chamfer and twist pin hemispherical radius contribute to ensuring adequate insertion even in case of misalignment.
Range of Micro-D 83513 micro d connectorswhich is covered by the MIL-DTL-83513* standard is ideally suited to equipment and applications where weight, miniaturization and long term performance are required. It is available:
- In 10 contact arrangements (9 to 100 contacts) for rectangular Micro-D connectors.
MIL dtl 83513 specification
|
CHARACTERISTIC |
SPECIFICATION |
TEST METHOD |
|
|
CURRENT RATING |
3 A max. |
EIA-364-70 |
|
|
CONTACT RESISTANCE |
10 mΩmax. |
EIA-364-06 |
|
|
INSULATION RESISTANCE |
5000 MΩmin.@ 500 Vdc |
EIA-364-21 |
|
|
DIELECTRIC WITHSTANDING VOLTAGE |
600 Vac |
EIA-364-20 |
|
|
- SEA LEVEL 0 m |
150 Vac |
||
|
- ALTITUDE 21 km (70,000 ft) |
|||
|
CONTACT ENGAGING AND |
170 g max.(6 oz) |
EIA-364-37 |
|
|
SEPARATION FORCE |
14 g min (0.5 oz) |
||
|
CONNECTOR MATING AND |
283 g (10 oz) x number of contacts max. |
EIA-364-13 |
|
|
DE-MATING FORCE |
|||
|
CONTACT RETENTION |
EIA-364-29 |
||
|
DURABILITY |
500 mating cycles min. |
EIA-364-09 |
|
|
TEMPERATURE RANGES |
|||
|
- STANDARD |
-55°C / +125°C |
||
|
- HIGH TEMP |
-55°C / +200°C |
||
|
VIBRATION |
10Hz-2000Hz,196m/s² |
EIA-364-28 - TEST CONDITION IV |
|
|
SHOCK |
735m/s² 11ms |
EIA-364-27 - TEST CONDITION E |
|
|
SALT SPRAY |
48 hours |
EIA-364-26 - TEST CONDITION B |
|
|
HUMIDITY |
Insulation resistance > 1MΩ |
EIA-364-31 - METHOD IV |
|
As a specialist in advanced military connectors china, Sunkyehas extensive experience in micro-miniature and nano miniature solutions based on the highly reliable Twist Pin contact technology. If you want to know more details or want a quotation , just feel free to contact us!
Send product request
Other supplier products
| Sunkye R04S Space Grade Micro D Right Angle To PCB Type Connector | Brief Introduction Micro-D connectors for space applications. Twist pin contacts, high density interconnection, 1.27mm contact spacing and 1.1mm sp... | |
| MICRO RIGHT ANGLE PCB CONNECTOR D-SUB TYPE | MICRO RIGHT ANGLE PCB CONNECTOR D-SUB TYPE The right angle pin connectorfeatures gold-plated BeCu Twist Pin contacts for best performance. Sunky... | |
| Micro Right Angle PCB Connector D-sub Type for Choice | As a professional connector milmanufacturer, all Sunkye mil spec connectorsare MIL-DTL compliant and are assembled with precision machined Becu twi... | |
| MICRO WIRELESS BACKSHELL CONNECTOR | Description: This type of device is designed to provide screening, sealing, and reparability. Micro-D connector backshellfor EMI connect cable shi... | |
| SOLDIER SYSTEM WEARABLES | Equipping soldiers for modern missions means giving them the technological edge to succeed. To develop soldier wearables and systems, including int... |
Same products
| 0.8-C Type Wire-to-Board Strip Connector | Seller: Zhejiang Wenda Electronics Co., Ltd. | WTB Wire-to-Board Strip Connector() 1、CKT: 2Pin to 25Pin 2、Current rating: 0.5A AC/DC 3、Voltage r... | |
| 2UUL BT03 FPC Connectors for Mobile Repair Tasks | Seller: Shenzhen Wikshu Technology Co. | 2UUL FPC Battery Connector Buckle for iPhone Android Phones 2UUL BT02 BT03 PW06 Battery Buckle fo... | |
| 3.65MM Pitch Wire-to-Wire Connector | Seller: ZHEJIANG KUAILI ELECTRONIC CO., LTD. | The PA 3.65mm pitch wire-to-wire connector is a compact and versatile electrical connector common... | |
| SH (1.0mm) Connector | Seller: ZHEJIANG KUAILI ELECTRONIC CO., LTD. | The SH (1.0mm) connector distinguishes itself through its thoughtfully engineered design, priorit... | |
| DF13 1.25mm series connectors | Seller: ZHEJIANG KUAILI ELECTRONIC CO., LTD. | The DF13 (1.25mm) connector stands out as a reliable and efficient solution for those seeking com... |


















