.

Resin Pressure Cable Jointing Systems

Scotchcast Resin Cable JointKit

Product introduction

Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc.

And in the Cable Joint breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function Scotchcast Resin Cable Joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damage.

Technical characteristics:

1, the shell is made of Scotchcast Resin, Scotchcast Resin are anisotropic materials, coupled with the formula and additives in a wide range of selectivity, glass steel according to the work environment and the state, adding special flame retardant additives, the glass steel material with good flame retardancy, the main parameters of flame retardant oxygen index should reach 62.5%. A high-quality composite glass steel, it has a special function to prevent acid, alkali, salt, oil and other corrosive media, and will not rust. The coastal areas and chemical sites and long buried underground requirements. Product performance to ensure that accessories can be a long time stable operation.

2, in the combination of Scotchcast Resin Cable Jointswith silicone rubber sealing ring to seal the shell, enhance the waterproof performance of the cable intermediate joint.

3, with a strong pressure performance, Scotchcast Resin Cable Jointscan withstand the impact from the internal or external.

4, in the Scotchcast Resin Cable Jointsside of a sealing plug sealed with silicone rubber discharge hole, and discharge hole direction can be adjusted, once the cable joint explosion, discharge hole on the sealing plug can be quickly opened and can effectively prevent the other cables, or the surrounding environment destruction, flame retardant properties of the shell is also can guarantee the internal flame extinguished due to hypoxia.

5, convenient and quick installation, can meet the requirements of 10kV, 35kV single core and three core cable laying.

6, safe and reliable, widely used in electric power, coal, chemical industry and other high-risk industries and key projects of power supply network.

Scope of application:

Glass steel casing is divided into several categories, which can be suitable for 10KV, 35KV, 110KV, 220KV, Cable Joint, 500KV. And can be applied to single core or three core and multi-core cable.

Jointing Kit Contents

Scotchcast Mould body with closure cap

Scotchcast 470W resin bag

Scotch 23 Tape

Armour connection components

Disposable gloves (EN394)

Detailed installation instruction

Instructions:

The main function of Scotchcast Resin Cable JointKitis to withstand a certain external force impact and damage in the middle of the joint.

Dead work

Check with Scotchcast Resin Cable JointKitdiameter applicable specifications and size with the cable and the middle of the head (the stress cone or shell) is consistent with the size of the;

Check the sealing material Scotchcast Resin Cable JointKit(gasket, opening Haff sealing material: glass steel shell and two port cable strip and heat shrinkable tube) is complete;

Check the high voltage cable sealant two component cable plastic packing is complete, the quantity of the component is sufficient;

Scotchcast Resin Cable JointKitassembly

The middle section cleaning about installing Scotchcast Resin Cable JointKitjoints, install the Scotchcast Resin Cable JointKiton the second half leads to coaxial cable or grounding cables, a plurality of tightening bolts, two Scotchcast Resin Cable JointKitports and coaxial cable and grounding cable sealing process (including sealing strip and shrink tube); the two components of high voltage cable cable sealant glue mix well; glue, glue should pay attention to its continuity, two groups of glue is filled into the interval of time as short as possible; glue please glue leakage;

Note: a two-component adhesive sealant for high-voltage cable cable in the process of curing some slight volume expansion, so can not be poured too full, generally below the mouth filling glue along the height of 20 to 30mm;

Closed cover mouth, installation is completed.

Contactus

Person in charge:Caeser

Tel:

Fax:

Phone:+86

E-mial:



Send product request

To: Bazhou WanQi Power Tools Factory
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Configurable Rodder Rod containing metal cable
Configurable Rodder Rod containing metal cable TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
Duct Hunter Length can be defined
Duct Hunter Length can be defined Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
Locatable Conduit Rodder Copper cable in rod
Locatable Conduit Rodder Copper cable in rod TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
Scotchcast Resin Joints
Scotchcast Resin Joints Scotchcast Resin Cable JointKit Product introduction: Cable Joint as an important connection point of the whole power supply network, its running s...
FIBRE GLASS RODS Very good quality
FIBRE GLASS RODS Very good quality Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
All supplier products

Same products

BD1AE Floor Renewing Machine
BD1AE Floor Renewing Machine Seller: Soniatrading CO,. LTD Integrating the functions of floor polish cleaner, it can be used for crystallizing or renewing o...
15L/30L/60L/80L  Wet and Dry Vacuum Cleaner LC151, LC301, LC602S, LC 802S
15L/30L/60L/80L Wet and Dry Vacuum Cleaner LC151, LC301, LC602S, LC 802S Seller: Soniatrading CO,. LTD Technical Item LC-151 LC-301 LC-602S LC-802S Capacity ...
XMR Distribution Box
XMR Distribution Box Seller: Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd. XMR Distribution Box Overview The XMR series distribution box is a power distribution unit that i...
KYN61-40.5 Armored Central AC Metal-enclosed Switchgear
KYN61-40.5 Armored Central AC Metal-enclosed Switchgear Seller: Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd. KYN61-40.5 Armored Central AC Metal-enclosed Switchgear ■OverviewKYN61-40.5(Z) type armored remov...
ZBW Prefabricated Substation (European)
ZBW Prefabricated Substation (European) Seller: Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd. ZBW Prefabricated Substation (European) ■Overview ZBW series prefabricated substation (European) ...