.

Detectable Rodder Rod containing metal cable

TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location of the TRACEABLE DUCT RODDER .

We can generate the TRACEABLE DUCT RODDER has two kinds, one is to be able to carry the monitoring function, one kind is the individual tracking function. The difference between the two is that with a probe into the function of a video wire inside, and a power cable, you can head the head to install the head, in order to view the situation in the pipeline. A bare copper wire can be used to locate and track the position of the TRACEABLE DUCT RODDER in a single probe function.

The traceable duct rodders are available in 8mm-16mm diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.

The traceable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads canmake a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter's lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides themost effectivemethod of signal transmission.

Roddiameter:φ6mm,φ8mm,φ9mm,φ10mm,φ11mm,φ12mm,φ13mm,φ14mm,φ15mm,φ16mm.Rod length:80m,100m,120m,150m,200m,250m,300m,350m,400m,500m.

Rod selectIon

Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:

The size of ducting it is to be pushed through

The distance the rod is to be pushed

The number and tightness of bends in the ducting

If the ducting is already occupied by cable

When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.

Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.

Rod

Tensile Strength

of Rod

Minimum Bend

Radius

Typical Max.

Duct Dia

Push or Pull

2,300 lb

105mm

50mm

100m

6

5800lb

180mm

60mm

150m

8

7,700 lb

260mm

80mm

200m

9

8,580 lb

300mm

100mm

250m

10

9850 lb

360mm

150mm

300m

11

11,000 lb

400mm

200mm

350m

12

13,000 lb

450mm

250mm

400m

13

17500 lb

510mm

300mm

450m

14

19500 lb

560mm

350mm

500m

15

23200 lb

610mm

400mm

550m

16

25120 lb

660mm

450mm

600m


Send product request

To: Bazhou WanQi Power Tools Factory
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Configurable Duct Rodders Professional manufacturer
Configurable Duct Rodders Professional manufacturer TRACEABLE DUCT RODDER containing metal lines, can be used to detect equipment easily detect the direction of the pipeline, as well as the location ...
 Resin Cable Jointing Kits for Pilot and Telecom Cables
Resin Cable Jointing Kits for Pilot and Telecom Cables Scotchcast Resin Cable JointKit Product introduction: Cable Joint as an important connection point of the whole power supply network, its running s...
Fiberglass Conduit Rodder
Fiberglass Conduit Rodder Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to ...
ex-proof box cable joints
ex-proof box cable joints Scotchcast Resin Cable JointKit Product introduction: Cable Joint as an important connection point of the whole power supply network, its running s...
Resin Cable Jointing Kits for Airfield Lighting Cables
Resin Cable Jointing Kits for Airfield Lighting Cables Scotchcast Resin Cable JointKit Product introduction: Cable Joint as an important connection point of the whole power supply network, its running s...
All supplier products

Same products

Side Channel Blower (4RB ring blower)
Side Channel Blower (4RB ring blower) Seller: Greentech International (Zhangqiu) Co., Ltd Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The ...
Greentech C500-1.5 High Flow Multistage Centrifugal Blower 380V AC Motor Aluminum Alloy Blades ODM OEM Customizable
Greentech C500-1.5 High Flow Multistage Centrifugal Blower 380V AC Motor Aluminum Alloy Blades ODM OEM Customizable Seller: Greentech International (Zhangqiu) Co., Ltd High Flow: Delivers up to 500m³/h airflow for efficient ventilation. Aluminum Alloy Blade...
Lz200 Air Suspension Centrifugal Blower/Suspensioncentrifugal Blower.
Lz200 Air Suspension Centrifugal Blower/Suspensioncentrifugal Blower. Seller: Greentech International (Zhangqiu) Co., Ltd Air Suspension Bearing:Air suspension bearings use air buoyancy instead of lubricating oil, and u...
Greentech LT-080 380V Low-Noise Three-Lobe Roots Blower Cast Iron Blades Belt Mounting Positive Pressure 850-1750rpm 1 Year
Greentech LT-080 380V Low-Noise Three-Lobe Roots Blower Cast Iron Blades Belt Mounting Positive Pressure 850-1750rpm 1 Year Seller: Greentech International (Zhangqiu) Co., Ltd Three-Lobe Rotor Design: Delivers stable airflow and reduced pulsation for efficient operation....
Greentech LT-080 380V Low-Noise Three-Lobe Roots Blower Cast Iron Blades Belt Mounting Positive Pressure 850-1750rpm 1 Year
Greentech LT-080 380V Low-Noise Three-Lobe Roots Blower Cast Iron Blades Belt Mounting Positive Pressure 850-1750rpm 1 Year Seller: Greentech International (Zhangqiu) Co., Ltd Three-Lobe Rotor Design: Delivers stable airflow and reduced pulsation for efficient operation....